decal removal?

Question

it is a parking permit for college. i want to remove it without damaging it

college parking permit. i want to remove it without damaging it. its on glass

Answer 1

use a hairdyer to heat it up and pull it off

Answer 2

This is hard to do in winter time. The colder it is the harder they are to remove. There use to be ultra thin razor blades "widgets", which have all but vanished from the market place. Get the glass as hot as you can with heat. If you apply moisture, many of these decals will self destruct b/c they are a combination of paper and a plastic. A hair dryer might help. A good sharp blade is a must. Start at the top and slowly work downward.

Answer 3

pass on your interior sight motor vehicle paint grant or physique shop grant shop. There are some countless issues they ought to have available to eliminate stickers and decals. One is a rubber wheel that somewhat works like an eraser ont he decals, yet another is a heated scraper which will warmth the sticky label up and use a razor blade to scrape it away. those to boot to sticky label remover beverages, yet with the beverages, you ought to get all of it the way down to easily the adhesive previously you need to use those. i've got in no way used the scraper variety, i don't experience optimistic using a razor blade on a painted floor by using fact it could scrape lots of the paint away besides. yet I somewhat have used the wheels, and that they paintings great, quite on smaller decals like bumper stickers and pinstripes.

Answer 4

If the decal is on your windshield try heating the glass from the outside with a heatgun. Then carefully lift the edges of the decal with a razorblade. Once you have it so you can hold the edge of the decal with your fingers, pull with gentle&constant pressure while keeping the glass very warm with the heatgun.(Be carefull ,if it is a tamperproof sticker it may pull apart or leave the word VOID written over it.)

Answer 5

Impossible.

I had one for a year, and it stayed on my car for another 2 years.

You have two options:
1) Leave it on
2) Remove it with nail polish remover; once you remove it, it won't be able to be used since the remover will get rid of any color, print, or stick.

If it's one you had to stick to your back window, you really are out of luck. I tried everything from GOOP to a hair dryer, and the nail polish remover was the only thing that worked.

Answer 6

The majority of answers will say you can't remove a decal, therefore...

I suggest taking your car to a plastic surgeon who specializes in tattoo removals by laser. Most car insurance companies will cover this.

If not, take your car to a tattoo parlor. Hopefully they can work WITH the decal's original graphics and turn it into a butterfly or a rose. You might as well get a tattoo while you're there too... in the shape of your car of course.

Hope this helps.
:)

Answer 7

you would have to be very careful, but using heat and a straight razor may be your best option.

use a heat source to loosen the glue (hair dryer, cigarette lighter.. just dont touch it with the flame)

after that it will be more plyable for the next step..

..lift up a little of the corner with your fingers until it feels like it wants to rip, then slide a straight razor underneath it gently, just repeat that process and it should come off damage free.

Answer 8

Alcohol works great to clean it off. Soak it with alcohol and rub with paper towel. Use hair dryer first and peel, then alcohol to get shreds left and goop left on.

Answer 9

If its on glass, Windex and a razor blade. Its that simple. Just make sure that you work it slowly, in stages, so you don't rip it. Let it dry and you're done!

Answer 10

A razor blade, a hair dryer and lots of patience.

Answer 11

if on glass you can scrape it off with a razor easily and safley and then use brake cleaner to wipe off the sticky residue