2006-11-01 17:01:45 · 6 answers · asked by Blackie L 1 in Cars & Transportation ➔ Motorcycles
Depends on the bike. It could be difficult because some use the crankshaft and flywheel to trigger a coil and points. That would require some specialized tools and such. Consult a repair manual. Most are pretty good and detailed.
2006-11-01 17:05:31 · answer #1 · answered by Anonymous · 0⤊ 0⤋
Depending on the brand of motorcycle, it is relatively easy. Harley, Triumph, Buell, Honda, Yamaha, and Kawasaki all sell aftermarket replacement ignition systems at their dealerships. They come with detailed instructions and depending on the bike can be done fairly quickly and easily. I redid the ignition on my 03 Harley 1200 in about 45 minutes with wire cutters, couple screwdrivers, and crimps. The kit cost about $300 bucks. Probly be cheaper on the other brands. Good luck!
2006-11-02 01:08:26 · answer #2 · answered by Ben M 2 · 1⤊ 0⤋
It depends on what year and brand/model it is.
If it's an older model, it'll have a set (or more) of points.
Newer ones are all electronic ignition.
Or is the problem you're talking about the coil?
You'll still have to check/adjust the timing.
Generally, it's easier to work on the electrical system on most bikes than it is on cars, as most have less wiring to deal with.
2006-11-02 11:18:53 · answer #3 · answered by strech 7 · 0⤊ 0⤋
If you get a good service manual, and follow the procedures exactly, it's not hard-anyone can do it. But if you just start tinkering with it, you might end up turning your bike into junk.
2006-11-04 23:14:23 · answer #4 · answered by zzooti 5 · 0⤊ 0⤋
Just remove & replace, don't try to fix them, it's just a waste of time and you will end up buying a new one anyway.
2006-11-02 10:13:41 · answer #5 · answered by Anonymous · 0⤊ 0⤋
I think it would be really hard for me to pull out th cash to do it.
2006-11-02 01:03:41 · answer #6 · answered by s so fresh c o double t 1 · 0⤊ 0⤋