2006-11-01 12:06:25 · 7 answers · asked by tamara_aquilina 2 in Home & Garden ➔ Other - Home & Garden
By getting an installer to do is you can void the warranty if you aren't a licensed installer. Check with the manufacturer what they cover if you install it as well.
2006-11-01 13:14:54 · answer #1 · answered by Anonymous · 0⤊ 0⤋
I'm lost here,, where does he say Zoned,,,???
He wants to install a condensing unit outside and a A-coil in the supply air plenum on the inside and run refrigerant lines between the 2 which he will have to pull a vacuum on these lines to get out any moisture, and install some electric for the outdoor unit,, 220Volts single phase, and low voltage control wire to bring on the blower with the outdoor condenser, and also install another thermostat probably.... but I wouldn't recommend it if were you,,, have a pro do it,, It will probably work then and also last a few years longer,,, Good Luck
2006-11-01 12:41:55 · answer #2 · answered by Bob G 2 · 0⤊ 0⤋
It's possible to bury it 12 feet in the ground. Is it reasonable? No. Put the damn unit outside like it's supposed to be. Are you afraid of linesets or something? Tell us what the REAL problem/situation is. Putting it in the garage wouldn't allow for proper air-flow and the "heat sink" (in this case, your garage) would rapidly reach a temperature at which the air conditioner would barely work or completely cease to work. You would trip the high limit pressure switch and that would be that.
2016-05-23 08:40:00 · answer #3 · answered by Anonymous · 0⤊ 0⤋
Do you mean zoned? Where you can set one area to come on dring the day, another at night, etc. Those are pretty hard to retrofit into an existing home. MUCH easier to do during new construction. It can be done if you've got enough room around the ducts. It also requires wiring at the dampers, and wiring to a central panel that controls the dampers based upon the programming of the thermostat. We loved our zoned A/C, adn were sorry to sell that home. It saved us so much money on electricity!!
2006-11-01 12:12:57 · answer #4 · answered by Sugar Pie 7 · 0⤊ 0⤋
Call A heating and Cooling contractor.
2006-11-01 12:42:43 · answer #5 · answered by Larry D 2 · 0⤊ 0⤋
If you need to ask it would be too complicated for you to do so. You need a license from the E.P.A. to work with refrigerant as well.
2006-11-01 15:37:11 · answer #6 · answered by Anonymous · 0⤊ 0⤋
I agree with Larry D.
2006-11-01 12:49:51 · answer #7 · answered by Dawg 4 · 0⤊ 0⤋