need info on how to remove transmission and drive shaft from a 93 ford f 150 2 whl dr and need details asap
2006-10-30 10:57:22 · 6 answers · asked by starchild1701 3 in Cars & Transportation ➔ Maintenance & Repairs
This is a very standard job. If you want step by step instructions over the net, forget it. Go buy a Haynes manual at any parts store and you will have all you need.
2006-10-30 11:06:57 · answer #1 · answered by Lab 7 · 0⤊ 1⤋
you'll need a 12 point 12 mm 1/2 drive socket and an impact to remove the driveshaft.
Manual or Automatic ??
2006-11-06 00:49:27 · answer #2 · answered by Anonymous · 0⤊ 0⤋
my best tip is to have a set of spanners and ratchet set
when you have high enoght of ground have a look and you will see what bolts and nuts to remove
to make life easy for you disconnect battery so you dont ark out starter but have a look and you will see how to remove it not hard just as a first time may take time
2006-11-06 04:46:27 · answer #3 · answered by Dane'o 3 · 0⤊ 0⤋
previous answer is right on. What ever you do be safe. Use wheel blocks and car stands. It is very easy to do, but if you have never done it before find someone who has to help and get the book.
2006-10-30 19:26:46 · answer #4 · answered by ? 4 · 0⤊ 1⤋
use your head... its not that hard if you at all compitent when it comes to autos. If not... buy a Haynes manual. they will walk you through it step by step and back again.
2006-11-05 14:34:12 · answer #5 · answered by masterwelder639 2 · 0⤊ 0⤋
EASY JOB. FOR DETAILED INFO GO TO ALLDATA DIY . COM YOU MUST PAY FOR THE SITE ABOUT 20.00 FOR ONE YEAR. REALLY GOOD INFO GOOD LUCK
2006-11-05 20:16:01 · answer #6 · answered by MIKE 1 · 0⤊ 0⤋