How can I use a washer and dryer with 220 Volt input required and 3KVa rating for each unit?

Question

I looked for transformers but it's too expensive. Almost like buying a new pair of washer and dryer. Is there any way for me to use it without shelling out that much money>

Answer 1

All washers and dryers normally use 220v. You need the correct receptacles in your house to do this. If you don't have a 220 line for this you will need to get an electrician in to do this for you.

Answer 2

Correct me if I'm wrong KVA = Kilo volt amps = Kilo 1000, 1000 KVA is 1000 watts....so inessence your set up is only 6000 watt set up and watts divided by volt = amps, so you have a 25 amp Draw, you can have an electrician install a 4 wire dryer outlet or do it yourself if you know how and put it on a 25 amp breaker

Answer 3

You need an electrician to run the outlets from your breaker box. Might have to have the entire box replaced if your current box doesnt have enough amperage for the appliances.