2006-10-29 14:20:39 · 5 answers · asked by Big shay 1 in Cars & Transportation ➔ Maintenance & Repairs
i own a repair shop,and i own a a 98 stratus,if your just changing the bulbs out you can get to it from the back,its kind of tight back there but it can be done,i usually unbolt the whole assembly and move it out a little ,because it saves time on doing this,but watch exactly how you remove the bolts on it ,because they have to go back in the exact same way on it,i usually take a marker and mark the position of them,because these are adjustable and can be gotten ot of alignment real easy,but if you mark them you wont have any problems lining them back up,and it save time also,unless you have really small hands and you might get them out from the back,but that's about it,its not a big job to do,good luck with it,i hope this help,s.
2006-10-29 14:35:00 · answer #1 · answered by dodge man 7 · 0⤊ 0⤋
Open the hood...the screws for the lens covers should be on the inside. If you have a manual, there should be a schematic to show you where they are.
I think that year has the little plug-in bulbs as opposed to the older, larger halogen lights.
Best bet is to go to an auto parts store like Kragen (www.napaautoparts.com) Sears or NAPA and ask.
2006-10-29 14:29:55 · answer #2 · answered by ? 6 · 0⤊ 0⤋
I know how but if I was following these directions I would never make it. Spend a few bucks and go to a parts store and buy a CHILTONS manual for your car. It will help you with lots of other things that will come up over time.
2006-10-29 14:41:42 · answer #3 · answered by tronary 7 · 0⤊ 0⤋
If its like mine it has a couple of screws under the hood you have to undo pretty simple once you see it
2006-10-29 14:27:41 · answer #4 · answered by Anonymous · 0⤊ 0⤋
I suggest that you read the auto mannel that came with your car. And, if you do not have one I suggest that you take your car to professional.
2006-10-29 14:23:24 · answer #5 · answered by moonguardianluna 3 · 0⤊ 0⤋