not sds or spline.(normal chuck)
2006-10-29 09:18:19 · 5 answers · asked by highhillhick 2 in Home & Garden ➔ Do It Yourself (DIY)
I don't believe you can get a masonry bit that large that's not sds or spline. Not to mention, with that size, you might be better off price-wise to rent a spline drive rotary hammer and the appropriate sized bit than to purchase the bit...depending, of course, on the length of time you plan on using it.
2006-10-30 03:50:03 · answer #1 · answered by Trid 6 · 0⤊ 0⤋
Any DIY store worth it's salt will supply, it will have a reduced shank to fit a 1/2 inch chuck.
Make sure your drill has the power to drive it, probably better with a pilot hole first.
2006-10-30 01:52:00 · answer #2 · answered by Bladerunner (Dave) 5 · 0⤊ 0⤋
I have several and I got them at either Home Depot or Lowe's.. YOu can also get them at Ace Hardware.. or on the East Coast at Heckinger's
2006-10-29 09:56:03 · answer #3 · answered by Anonymous · 0⤊ 0⤋
any tool shop should have them. but the best place to look would be a masonry supply yard
2006-10-29 09:21:25 · answer #4 · answered by gojets126 3 · 0⤊ 0⤋
lows or Home depot, and brick yard mostley will not have that. try ebay, they have that sort of thing aswell.
2006-10-29 09:46:23 · answer #5 · answered by mike67333 6 · 0⤊ 0⤋