how can you tell if a diamond is real by looking at it?

Answer 1

The only people who can authenticate a real diamond are certified gemologists specializing in jewelry. However, if you are browsing rings at a flea market and want to quickly assess whether a clear stone is probably glass, cubic zirconium, quartz, or leaded crystal, there are a few easy tests you can apply without any special equipment. These tests at least rule out recognizable imposters because they rely on the way a real diamond stone refracts light, conducts heat, and looks up-close.

If the gem in question is loose and unmounted, try placing it over printing. Diamonds refract so much light that they will not work as a magnifying glass and you would see no lines, circles, or letters through them. Other clear stones like glass or crystal will reveal the print clearly. A similar test uses a small light, such as the one that comes with your key ring. If you shine the light through the stone and cannot see it on the other side, but only a bright halo around the rim, it is more likely to be a true diamond.

Diamonds are also very good at conducting heat. Breathe on the surface of the stone and immediately check to see if it has fogged up. Again, quartz, glass, and cubic zirconium will stay hazy for a moment before the condensation dissipates, but you shouldn't be able to see any moisture on a true diamond. However, one rock, called moissanite, will also pass this test, so the best way is to get a complete thermal conductivity evaluation performed by a jeweler.

Looking closely at the specks, ridges, and facets can also give you a clue into the identity of your gem. Diamonds do have inclusions, tiny bits of other minerals that got crushed into the diamond while it formed deep under the earth. However, if the facets have worn or rounded edges, bubbles, or if the gem looks rippled or pitted, it is probably glass. Those gems that are perfectly clear, with absolutely no inclusions, are probably quartz.

Finally, some common sense measures can prevent you from getting pressured to purchase a gem that turns out to be something other than a diamond. It shouldn't be ridiculously inexpensive, or you'll get what you pay for. It also will usually be mounted in an "open back" setting, which means that you can see around the rear of the gem and the back surface isn't coated with any silvery substance. Although it's true that diamonds are the hardest organic substance on earth, the infamous test of scratching diamonds across glass or metal might just give you a damaged diamond.

Even many gemologists cannot distinguish "real" diamonds from cultured diamonds. Cultured diamonds have been artificially manmade in a laboratory, not mined from mountains, yet they are chemically identical to those diamonds. Some companies are developing new kinds of identification methods for those who would like to purchase a mined diamond or for those that prefer a cultured one.

Answer 2

I don't know whether this is true or not. But I've heard that if you look through a diamond and can see the otherside, the diamond is not real. True diamond will not give you a clear view.

Answer 3

You can't, it takes an experienced diamond trader with a jeweler's loop to make that determination. They can still sometimes can be fooled by some of the synthetic stones available.

Answer 4

Will it cut glass? Have a jeweler look at it. There are so many simulated diamonds out there that it is hard for even jewelers to keep up with them. Have a pro look at it.

Answer 5

I look at it very closely and see is it worth buying.

Answer 6

well in the in side of the dimond it is kind of clear so you can see right through it.

Answer 7

I dunno.