English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

I have a Dell Inspiron 5160, and recently the battery light keeps flickering amber, even if I have it on mains, why is this?

2006-10-29 06:03:45 · 5 answers · asked by Anonymous in Computers & Internet Hardware Laptops & Notebooks

5 answers

It's F**ked If you ask me...

2006-10-29 06:05:40 · answer #1 · answered by mark leshark 4 · 0 0

i think of there could be greater in the back of this than you think of. nicely, according to probability. I even have lighting fixtures furniture in my basement which will flicker consistently while off. it relatively is not the swap. nicely, truthfully it relatively is the swap. however the swap is performing usually. The swap i'm concerning is a action detector swap. while it senses circulate it switches on. however the challenge is that i'm working digital ballasts, which do no longer present day the perfect load for the swap. So what i've got had to do replaced into upload a nicely-known incandescent bulb to the circuit so the lighting fixtures furniture will bypass thoroughly off while they are meant to. That bulb burned out sooner or later and the lighting fixtures furniture began to flicker lower back. Swapping that bulb with yet another stable incandescent bulb made it supply up. I additionally tried LED lighting fixtures furniture on that circuit - same effect, consistent flickering. besides the undeniable fact that, you describe a pull cord swap. it relatively is unlikely going to be a sensor or dimmer of any style, in easy terms an common make or wreck touch swap. in spite of the bulb style the easy the two must be ON or OFF. no longer someplace in between. It seems such as you need to have a foul swap. the domicile progression shops have lighting fixtures furniture that have pull cords already on them and that they are relatively inexpensive. changing them is at once forward. One white cord, one black cord and specific a floor terminal. yet in simple terms changing the swap on your easy fixture on my own could be greater worry than it relatively is nicely worth. ME? i could in simple terms replace the full fixture and be finished with it in 5 minutes. caution: confirm to tutor the flexibility OFF on the BREAKER. or you need to GET A HECK OF A marvel. desire this facilitates. 'av'a g'day mate. ")

2016-10-20 23:19:44 · answer #2 · answered by ? 4 · 0 0

Probably because some electricity is getting to the diode every so often. This causes it to light and then it goes out when the electricity stops.

2006-10-29 06:06:25 · answer #3 · answered by Anonymous · 0 0

battery is possibly dying? Or defective?

2006-10-29 06:04:50 · answer #4 · answered by djskeets 4 · 0 0

One possibility is that your AC connection is faulty.

2006-10-29 06:11:51 · answer #5 · answered by Adios 5 · 0 0

fedest.com, questions and answers