How do you take off a starter on a '97 Ford Expedition?

Question

a '97 Edddie Bauer Ford Expedition

Answer 1

...and to add to MC's post, you will need a flex socket 13mm. Those three bolts that hold the starter will be tricky to access. You can either try with a LONG 3/8 drive extension, or remove the right front wheel, and try to access the bolts, especially the one on the top. The battery cable terminal is a 13mm. The small S terminal is a 10mm. Make sure not to forget to re-install the red plastic protective cover. Hope this helps. Good luck.

Answer 2

disconnect the battery. disconnect the wires from the starter (remember where they go!!!!!) un bolt the starter......