Changed bulbs, switch, fuse is good, hazards work, still no brake lights. Help?
2006-10-28 09:55:21 · 5 answers · asked by reinadelaz 6 in Cars & Transportation ➔ Maintenance & Repairs
I would reccomend that you check out a few differnt stores on the web simplly go to google and put that in or even you could try ebay but be carful and make sure and read everything that it says. Make sure that its what you want.
2006-10-28 10:04:21 · answer #1 · answered by crazy lady blue 2 · 0⤊ 0⤋
get a tester for the wires that run to the lights. You touch the red with a point and then just touch metal on the van....if it works your in business and just need to ground them properley. the ground is right there where the wires come into the light. Check the connections. Even rust on the connectors could do it. Strip them back and add new wire. Go to your local hardware store and get one of those little test lights for connections.
2006-10-28 10:04:35 · answer #2 · answered by Andrew B. 4 · 0⤊ 0⤋
grounded to the frame at the rear of the van
2006-10-28 10:09:02 · answer #3 · answered by skee_dee 1 · 0⤊ 0⤋
the frame of the van is used to ground the electrical system
2006-10-28 10:05:52 · answer #4 · answered by norsmen 5 · 0⤊ 0⤋
do your turn signals work ??? if they do than its your turn signal switch thats bad. but the ground wire usually is attached to the frame on the drivers side in the rear
2006-10-28 10:40:03 · answer #5 · answered by Christian 7 · 0⤊ 0⤋