2006-10-28 06:33:36 · 9 answers · asked by sonyadomergue 1 in Computers & Internet ➔ Hardware ➔ Monitors
Depends on WHAT computer error. Some can be corrected, some cannot.
2006-10-28 06:36:53 · answer #1 · answered by Whatta 3 · 0⤊ 0⤋
Question: What is a computer error?
Answer: the occurrence of an incorrect result produced by a computer.
Question: How can it (computer error) be corrected/remedied?
Answer: Troubleshooting the computer error.
Hope this helps.
2006-10-28 06:58:52 · answer #2 · answered by The Internet Is Yours 5 · 0⤊ 0⤋
copmuter errors vary from a software error ro driver errors, could even be an error with your hardware. what ever the copmuter ooperating system considers to be abnormal is a computer error. you can stop by physically checking every connection in and around the computer. from there, you can boot into safe mood, if that didn't fix it. in safe mood, you would go to the device manager which is found in the system information window under the hardware tab. there you will be able to see what driver is causing the error. if none, then you need to recover you pc with the software that it comes with to find the software issue. before you do this though, ensure that everything that you intend to keep is back-up on a cd, jump-drive or something, this step will completely wipe the hard drive clean and clear and reload the operating system only.
2006-10-28 06:41:06 · answer #3 · answered by John A 3 · 1⤊ 0⤋
A computer error message is what happens when something in the computer breaks, but not so much that it can't tell you what went wrong.
In general, to fix it, you read what the error said happens, and stop it happening.
A computer error is any problem with a computer.
Computer Error is what gets blamed when nobody else wants the blame.
2006-10-29 02:17:49 · answer #4 · answered by lordandmaker 3 · 0⤊ 0⤋
A computer error is fault in the system or in a program. You can correct it with various software programs, such as Norton Systemworks which is excellent package to keep your system in check.
2006-10-28 06:36:51 · answer #5 · answered by Dre 3 · 0⤊ 0⤋
Most can be remedied ,But it depends on the type of error how.
2006-10-28 09:06:42 · answer #6 · answered by psychodad 3 · 0⤊ 0⤋
Hardware or software?
There are as many errors as you can imagine. Each one with different solutions.
If it were that easy to answer this question there would be no IT people making a life of this.
2006-10-28 06:42:43 · answer #7 · answered by sable_laser 3 · 0⤊ 0⤋
in all likelihood skill the computer can't stumble on your keyboard (even even though it could be plugged in). If it really is the keyboard you've been utilising continuously, close down your pc, unplug & plug the keyboard in back and capacity up. might want to artwork after that. (Does for me) even if it really is a clean keyboard, close down your pc, plug on your old keyboard then use it to position in drivers on your new keyboard.
2016-12-05 07:56:08 · answer #8 · answered by ? 4 · 0⤊ 0⤋
That is WAY TOO GENERAL of a question.
2006-10-28 06:40:54 · answer #9 · answered by DiRTy D 5 · 0⤊ 0⤋