car dont shift strong could it be the speed sensor???
2006-10-27 13:13:06 · 3 answers · asked by Ray M 2 in Cars & Transportation ➔ Maintenance & Repairs
E30-is ISC out of range,this is a Idle speed control motor that is either not adjusted correctly or is binding causing high idle speeds,it either needs to be replaced or adjusted,if it is to be adjusted then it needs to be done paying strict attention to the service manual,also when it is adjusted the Throttle position sensor needs to be adjusted to .55volts at min idle.
-----
guy below me obviously got his info from the same site as I did and didn't bother to site it - this is not only dishonest it is a violation of copyright laws. big thumbs down for him.
2006-10-27 13:18:40 · answer #1 · answered by Brooks B 3 · 0⤊ 0⤋
Code E30 sets because the actual engine speed never reaches desired rpm signifying a slow or failed ISC motor. The ISC motor connector is located behind the ...
2006-10-27 20:16:02 · answer #2 · answered by Anonymous · 0⤊ 0⤋
E30-is ISC out of range,this is a Idle speed control motor that is either not adjusted correctly or is binding causing high idle speeds,it either needs to be replaced or adjusted,
2006-10-27 20:53:18 · answer #3 · answered by vw66hotbugtallen 2 · 0⤊ 1⤋