Is there anyway of cleaning the head in my printer manually?

Question

I have an Epson Stylus C42 plus. On it i can clean the head by simply clicking on clean head but this uses up ink. Is there any way to clean the head manualy so that it doesn't use use up ink e.g. open it up and use a tissue to clean it inside. I'm not very good with computer hardware stuff so please help. Thanks.

Answer 1

A clogged print head on your inkjet printer is not a fine thing. Over time (especially when there's long periods of no printer use) the many tiny holes that make up a modern inkjet printer's head can become clogged with dried ink.

Most printers today have some sort of cleaning routine where either you instruct the printer to go through a cleaning cycle via a program on your computer or you press a squence of buttons on the printer itself to begin the process. A number of these cleanings, in succession, will usually take care of a clogged head--but not always. I recently found my year and a half old Epson Stylus Color 600 unable to print coherently using black ink and no amount of standard cleaning-cycle runthroughs would fix the problem.

On some inkjet printers (HP's for instance) the ink cartridge contains the print head, so changing the cartridge gives you a new, unclogged printhead. My Epson's print head is part of the printer itself, and can only be replaced by a service technician, and the cost is usually very close to the price of the printer itself. I had to come up with something better than that, so I began searching the web to see what people in similar predicaments had done. I found that I my problem was not unique and there were some rather successful remedies floating around.

I discovered that isopropyl alcohol (I bought a bottle of 91% alcohol at the drugstore for ~$3) is a great solvent for this sort of dried ink. There were those that recommended that I take an old, discarded ink jet cartridge, open it, clean it out with the alcohol, fill it back up with alcohol, reseal it, and place it in the printer for a few runs through the printer's self-cleaning method. This proved to be a rather messy endeavor indeed, so I followed a bit of less-agressive advice.

I simply removed the black print cartridge from the printer and dropped 7-10 drops of alcohol down in the ink-recepticle area where the ink cartridge normally sits (there should be a little hole down in there where the ink actually flows from the cartridge into the head), replaced the ink cartridge, and ran a few sessions of the printers head-cleaning routine. It took quite a few cleaning sessions (probably 15-20) with a few pages of text prints thrown in there just to try and move some ink, before it cleared up.

It actually had to sit overnight, with the last few cleanings done the next morning, before all was well--but well it is. Everything works perfectly now, and I don't have to go out and buy a new printer.

To avoid such blockages, it's a good idea to print something, both in color and black&white (if you've got a color printer), once a week or so just to keep things moving. But if you do end up cursed with a blocked print head--this method should take care of you.


Hope this takes care of your issue.

Points apreciated.

Answer 2

The purpose of cleaning the head is not just to make it dust free, but to get the dried crap off the head and get the ink flowing. A tissue or even paper would just clog it up. The pressure you put on the delicate head could damage it.

Answer 3

Use 70% or 90% rubbing alcohol and a lint free cloth even cotton balls will do. For heavely clogged heads soak in a small amount of alcohol for 10 mins and then wipe with lint free cloth dampened with alcohol. Never use tissues or paper towels the lint from them clog your heads even more.

Answer 4

Cotton Wool Bud and Vodka or any Fine Alcoholic Spirit that evaporates instantly!