wet stone or or oil?

Question

how do you know the difference in a wet stone or or oil.i have some old stones(for knife sharppning)that have been given to me by family.some say use a little water others say oil.dose it make a difference?

Answer 1

oil stones are hard and wet stones are soft. if you can scratch it with a nail or knife tip, its a wet stone.

Answer 2

Oil would be better at preventing rust, although to due to its ability to make one surface slide much easier over the other it would also make it a little tougher to sharpen. There are additives that you can add to the water to help keep it from rusting. Also, you could use distilled water. Distilled water will not cause oxidation. However, it would be a good idea to coat the knife with oil after using distilled water to sharpen it and drying it off. This will help put a small oil coating over the newly exposed surface so that the air won't cause it to rust.

Answer 3

I'm more partial to ceramic rods and a diamond hone, personally.

You can use oil, but it can turn rancid and start to smell if you're not using the right stuff. I wouldn't go for water, because you're causing minute gouges in the surface of a carbon steel blade, which leads to oxidation of the edge.

Answer 4

you additionally could make knives razor sharp with any style of polishing stone. i exploit a dry stone and an arkansas stone for mine yet ive heard that moist stones are greater useful. With a moist stone one coats the stone in an oil usually and it helps from clogging the stone and improves the common of the polishing.

Answer 5

Use a little oil, it lubricates & won't create rust as water will. That is why you use cutting oil when drilling metal

Answer 6

use oil its better and you dont have to add so ofter the term wet dosent neccacerily mean water i have always used oil

Answer 7

water works better. my father used to spit on the stone before sharpening his knives