When you gage tin metal. Why is it that the smaller number grade is thicker.?

Question

But if you measure it with a micrometer the number gets bigger as the metal gets thicker.

Answer 1

U.S. gage, the standard for sheet metal is based on the weight of the metal, not on the thickness. 16-gage is listed as approximately .0625 inch thick and 40 ounces per square foot (the original standard was based on wrought iron at .2778 pounds per cubic inch; steel has almost entirely superseded wrought iron for sheet use, at .2833 pounds per cubic inch). Smaller numbers refer to greater thickness. There is no formula for converting gage to thickness or weight

Check out this link.
http://asuwlink.uwyo.edu/~metal/gage.html
Hope it helps.

Answer 2

Gage: An arbitrary assignment of numbers to size, used on sheet, wire, and many other things (tubing, shotgun bore, needles, and so on). Unfortunately there are so many different standards that using gage to specify a material is almost useless, and perhaps even dangerous. If in doubt, use decimals.

For example, in U.S. gage, the standard for sheet metal is based on the weight of the metal, not on the thickness. 16-gage is listed as approximately .0625 inch thick and 40 ounces per square foot (the original standard was based on wrought iron at .2778 pounds per cubic inch; steel has almost entirely superseded wrought iron for sheet use, at .2833 pounds per cubic inch). Smaller numbers refer to greater thickness. There is no formula for converting gage to thickness or weight.

Wire might be specified in American or Browne & Sharpe, Birmingham or Stubs, Washburn & Moen, Trenton Iron Co., Stubs' Steel, Imperial Wire gage, music wire gauge, or others. In the US, I've commonly seen electrical wire in AWG (American Wire Gauge); even-numbered values are much more common than odd ones. As an example, 12-gauge wire is .081" (AWG), .109" (Birmingham or Stubs), .105" (Washburn & Moen), .028" (music wire gauge). In most cases a larger gauge means smaller wire, except music wire goes the other way around!

I hope this helps!
Newt

Answer 3

It is the same with electrical wiring, the smaller the number the bigger the wire and the more current it can handle.