whats the difference if any between the suzuki RMX250s and the RM or thew RMZ?

Question

I just got a RMX and want to get some pivot pegz but they only sell them for the RM or RMZ ... will the fit on the RMX250s ???

Answer 1

depends on the re year, rmx were made from like 89 to 96 and are basically unchanged. they are almost identical to a 89 to 92 rm. most parts that fit that year rm will fit rmx. the rmx is enduro version of the rm, with a heavier flywheel and a wide ratio trans. choked down in power. if you want it to really rip but a 89 rm 250 head gasket on it. it is 1/3 thinner really raises the compression ratio. and rejet the thing it has like 240 main jet where an rm has a 340. i have an 92 rmx250 i redid and is it great. learned some tricks from an old harescrambler racer that used to race rmx for suzuki. as for the pegs they are about the same for most rms' but if they have some that fit older rm's 89 to 92 they will fit.

Answer 2

Only if you can match years with the RM. The RMX was Suzuki's enduro/off-road version of the RM line. The frames were basically the same during the years they were produced. I doubt that later model will retrofit onto the earlier frame though.

Answer 3

RM is motocross only, very similar frame to RMX of same year (RMX is Enduro and has lights, possible to make it street legal in Europe) Both have two stroke engines
RMZ is new fourstroke, dont know what parts from older RM will fit (if any) You need to get a tape measure and visit a bike shop.

Answer 4

Rmx250s