2006-10-24 13:13:16 · 3 answers · asked by John R 1 in Cars & Transportation ➔ Maintenance & Repairs
You need to remove the dash panel around the radio first. Most are just snaped on with clips. Then you need 4 paperclips or something small and push them through the holes in all 4 corners of the radio and leave them in the holes. Pull the radio out. The paperclips relese the clips that are holding the radio in.
2006-10-24 13:20:44 · answer #1 · answered by mister 7 · 0⤊ 0⤋
There are FOUR (4) PENCIL LEAD SIZE holes on the face of the radio TWO (2) on each side.Take a couple of metal clothes hangers and cut the LONG STRAIGHT sections out of the hangers and bend them into a "U" shaped piece and push them into the holes until they bottom out and pull the radio out,if the clothes hangers do not work then go to your local parts store and buy the proper tool they are not that expensive.After it is out disconnect any plugs and wires and remove it from the vehicle.
2006-10-24 20:22:52 · answer #2 · answered by hjbergel 5 · 0⤊ 0⤋
go to Crutchfield.com they may have an online set of instructions, and they have a pretty cool web site for all the latest hi-tech that you could buy, pack, and run in that wagon
2006-10-24 20:19:57 · answer #3 · answered by thugtwin1@sbcglobal.net 3 · 0⤊ 0⤋