NEED UNIVERSAL REMOTE HELP, i dont know what button sets the code.?

Question

i have this remote http://www.dsmiller.com/Images/PM-435S.jpg

Its a philips 435S 4 device controler. DAmn thing is new, but i dropped it and the batteries came out and reset the whole damn thing.

Now i cant remember what button sets the codes. You can manually do it by holding code search until the light comes on, then press the device you want to set, and then hit the power button till the device shuts off. Problem is there a button you hit after the device turns off that sets the code for the remote. AND I CANT REMEMBER WHICH BUTTON.

Iam seriously about ready to burn down the philips plant.

THEIR WEB SITE IS USELESS! ive tried going at it from every angle i can think of... all it does is reroute me. I cant find the guide for this remote anywhere, let alone online.

PLEASE HELP. iam pregnant and hoisting myself off the sofa to change channels is a pain in the butt...lol.

Answer 1

Okay, not sure if this will answer, but try it. 1) press and hold the Code Search button until the red indicator stays on. Release the Code Search button. 2) press and release the desired mode button (TV, DVD, ect). The red indicator blinks, then stays lit. 3) enter the 3 digit code from the code tables (add additional information for me to tell you which codes. I need brand of TV, VCR or DVD player, I'll tell you the codes. Note: After a valid code entry, the red indicator turns off, For an invalid code, the red indicator flashes. 4) with your device on, press channel Up. if the device responds, no further programming is required.

Answer 2

This is one of those questions that needs more information. I've used a couple of universal remotes. If your TV is less than 15 years old and accepts remote signals, your Instruction booklet should have the codes and steps required to program it. Any help you recieve from here would likely be less than what you need to adequately program the remote. Follow the instructions in the booklet, if you make a mistake - start over - you won't break anything. I know from experience that they do not make it easy - but trust yourself and the messy instructions, they will eventually get you to where you need to be.

Answer 3

Hold the code set button until it lights up ,press the button for the device you want to control,enter the code for the device,try to see if it works,if it works press the device button done deal.

Answer 4

sorry wish i could help but i don't know how

good luck
u could just go buy another control
sucks but if u have no other solution.

good luck