2006-10-23 14:37:17 · 13 answers · asked by dakirch 3 in Computers & Internet ➔ Hardware ➔ Desktops
Well in the setup screen when the computer starts up it is recognized and it has the same settings. But When I go to "My Computer" it only recognizes the one hard drive.
2006-10-23 14:42:14 · update #1
Ok I see the 4 sets of 2 pins, How do I make it the slave?
2006-10-23 14:48:22 · update #2
If you added a second hard drive make sure it's set as slave...you will see those pins at end of the drive
2006-10-23 14:39:47 · answer #1 · answered by Anonymous · 1⤊ 0⤋
It sounds as if it was an unformatted drive. If it shows up at boot, the jumpers (master, slave, CS) is configured correctly. It does sound as if it needs to be partitioned though. There isn't any boot sector. A quick way is as someone else suggested. Use the Administrative Tools to set the partition and logical drive.
If this is a new drive, it should have came with a utility disk to set the partition. Check the box. The instructions are pretty straight forward. Use this if the Windows Administrative Tools is a problem.
Good luck
2006-10-23 21:55:36 · answer #2 · answered by Brett S 2 · 0⤊ 0⤋
1. the drive jumper must be set correctly. Most computers need the first drive on the end of the IDE cable to be set as Master.
Drive in the middle connector on the IDE set to slave. (Except for some Compaqs, older eMachines, etc. that run as Cable Select, or, CS for the jumper) Cable select makes the end drive Master.
2. No CDroms on the hard drive IDE cable.
3. Upon boot, enter the CMOS Setup, and let the drives be AUTO selected. Must format the drives after that. After format, or partitioning, you should restart the system, so BIOS recognizes the drives.
2006-10-23 21:47:42 · answer #3 · answered by Anonymous · 0⤊ 0⤋
First of all check the cabling. If you use a flatband cable make sure you have the adapter plugged in correctly. You should always have the master drive be sittign closer to the controller and the slave at the end of the daisy chain. Then check the Jumber settings. The master drive jumpers need to be checked to because they will need to support master/slave mode as well! Most people only look at the jumper settings on the slave drive...
Lastly, check your BIOS settings. More recent BIOSs will auto-detect the drives...
2006-10-23 21:45:10 · answer #4 · answered by Joey Madison 2 · 0⤊ 0⤋
Discover now the best sport betting system: http://sport-betting-tips.gelaf.info
Too many people think of sports betting as just something they do in their past time. However, many people can see the potential that exists if you manage to have the right sports betting strategy and correct approach to betting in general. Are you sick of losing? Interested in finding out how to turn your luck around? Do you want to know which sports betting strategies stand to help you make the most from your betting?
Any good strategy should allow you to place bets based on a systematic method. Of course there is always a random element or so called luck involved, but betting is all about stacking the odds in your favor. There should be no guess work involved or bets placed based on gut feelings. Betting is a business and it should be treated like one. Any money you use for betting needs to be separate from money you use for your daily life or anything else. How can you possibly expect to follow a strategy with money that was originally set aside to pay next week's rent with? You can't. This will help you to focus on the task of betting and remove any emotional strings attached to the money.
So what makes a good strategy or what should you look for in a strategy before you decide to implement it? Any good strategy needs to have a positive expectancy. This means that in the long run you will win. The hit rate of the strategy needs to be above 50% for you to be able to profit in the long run. An ideal win rate should be between 60 to 70%, because you will need to cover the fees and other expensive associated with betting. Is it feasible to expect you'll be able to find a system that has a 100% win rate? No, it isn't. The best you can do is find a system that has a positive expectancy and stick with it. In the long run you will make more money than you can possibly lose.
Keep whatever information and news you have about the teams as up to date as possible. Any changes in the teams makeup or factors that affect how the players play will great affect the potential outcome of a match. Make sure that you are constantly up to date on every aspect that affects the potential outcome of a match. Information is the key to winning at sports betting.
2014-10-18 12:58:08 · answer #5 · answered by Anonymous · 0⤊ 0⤋
Check the slave/master settings... the two rows of four pins at the rear of the drive. Set this drive as the slave.
Just giving the same advice to build confidence in the answer.
2006-10-23 21:41:47 · answer #6 · answered by Anonymous · 0⤊ 0⤋
Depends on how you added it! Was it pre formatted? Did you set the jumper right? If its a slave drive, make sure the original drive is jumpered to master and not cable select and the slave is set to slave. When you boot, you should see a brief description of both drives. After you have booted up, look in "my computer" to see if it shows.
2006-10-23 21:45:25 · answer #7 · answered by Anonymous · 0⤊ 0⤋
check the jumpers on the back of the hard drive thats the most likely problem most people forget to switch it to a slave drive, because its boxed as a master.
2006-10-23 21:39:00 · answer #8 · answered by mathewhp22 2 · 1⤊ 0⤋
Is it in the Disk Management app (control panel)? It's been a while, but I'm wondering if you have to format it to have Windows see it as a drive. I'm betting you do, since linux partitions don't show up as drive letters.
2006-10-23 21:45:29 · answer #9 · answered by geek49203 6 · 0⤊ 0⤋
There may be many reasons for this problem. I can give you a link that deals with hard drive problems. Some hard drive problems can be easily fixed yourself by using easily available tools. I found the info at http://fixit.in useful
2006-10-24 05:16:16 · answer #10 · answered by blsruthi 3 · 0⤊ 0⤋