2006-10-23 06:13:25 · 3 answers · asked by Brady D 1 in Computers & Internet ➔ Hardware ➔ Desktops
First you turn all power off, then hit the PC start button (this will drain any power left to LEDs/Fans, next you need to remove the front of your case and side panels (ware a static cuff) unplug all related cables to USB Card Reader, coil and tie as you may have a use for them latter, you will see two screws each side holding the Card Reader in place remove them and the Reader will slide out the front, fit a 3.5" bezel to fill the gap, Job Done !
2006-10-23 06:42:31 · answer #1 · answered by Cybercat 3 · 0⤊ 0⤋
Turn off the power, remove the access panel, ground yourself on the metal frame of the case. It should be located in a floppy drive slot. Disconnect the power cord to the drive, disconnect the USB cord to the mobo and the IDEs (if it has a floppy drive also). Remove the screws that hold the drive in place (you may have to remove the other access panel to do this). Push the drive out the front of the computer. Plug the drive hole with a blank.
2006-10-23 14:39:15 · answer #2 · answered by mittalman53 5 · 0⤊ 0⤋
any usb device i have in i just take out. this . USB Card Reader.not sure what to do on that i watch and learn .
2006-10-23 13:17:50 · answer #3 · answered by ? 4 · 0⤊ 1⤋