how do you install a serpentine belt on a 1996 dodge caravan 3.0 L?

Question

dodge caravan 1996

Answer 1

take it to a mechanic

Answer 2

There is actually a special field fix kit available for this vehicle's 3.0L engine. It is available from either Goodyear or Gates. The Goodyear part number is 49204K and the Gates part number is 38342K. If you purchase this kit you will receive detailed instructions on how to install not only the serpentine belt but also the belt tensioner. These vehicles are known for the serpentine belt falling off, and this special kit fixes that problem once and for all. The kit includes a special (ribs on both sides) belt that locks into place and therefore cannot fall off. It is really slick. The kit only cost about $100 and takes about 1hr to install.

Answer 3

pretty easy, first draw a picture of the belt and label all accessories so you remember how to put it back on if you get stuck, then you either need a 3/8 ratchet or belt tool with 3/8 adapter, then you stick that in the hole on the idler pulley and pull it until you see the belt loosen and then you know you turned right way usally to the left, then remove belt and reinstall, start and turn off right away then check to see if belt is fully seated on pulleys and your good to go

Answer 4

do no longer know no cyber web internet site. yet whilst u initiate from the alt is going down and around playstation as much as tensioner right down to crank -lower back area of belt runs water pump to ac- around to loafer to alt. Thats on a three.3.

Answer 5

I know that people don't like links, etc., but if you go to: autozone.com/servlet/uibroker you can get a diagram and print it. I just replaced one in a car yesterday and I didn't have a diagram so I went to this address.