All but one have the same wear on them. One seems abnormally worn like it was spinning around. They are rollers rockers on a chevy 2.2. with about 104k miles on it.
2006-10-22 03:56:02 · 4 answers · asked by nyneseclx 2 in Cars & Transportation ➔ Maintenance & Repairs
I said roller rockers. I meant roller lifters. Also they are $20 apiece x 8 and this is going on a truck that will just be for taking out the trash.
2006-10-22 08:32:34 · update #1
they are cheap enough i would go ahead and replace them while they are out
2006-10-22 04:05:23 · answer #1 · answered by jess g 1 · 0⤊ 0⤋
If you have them out just buy new ones, they are not that costly. A stock cam is that that costly either, I would replace both the cam and lifters. Think what it will cost to tear it apart again.
2006-10-22 11:41:02 · answer #2 · answered by Thomas S 6 · 0⤊ 0⤋
Always replace the cam if you install new lifters. If you don't, you'll be replacing the cam again.
2006-10-22 15:17:19 · answer #3 · answered by Anonymous · 0⤊ 0⤋
If you have them out go ahead and put new ones in. Especially if they're mixed up.
2006-10-22 14:10:34 · answer #4 · answered by Nomadd 7 · 0⤊ 0⤋