Steering wheel shakes when brakes are applied on vehicle?

Question

I

Answer 1

You should have your brakes and rotors checked out. Common sympton of these going bad.

Answer 2

If its just stopping and not when turning, get your brakes checked. If you have not had them serviced for a while the front pads may be worn and need to be replaced. The rotors probably need to be machined or replaced as well. You should have your brakes serviced at least once a year.

Answer 3

It' an informed assumption, the front brakes are alternately grabbing and pulling to their respective factors,for this reason the guidance wheel jerks r then l in speedy succession.I although might take it to a brake shop,dealerships r very high priced.

Answer 4

I concur with above answers, some are great ! A simple solution may be to jack up vehicle, remove lugs, let rotors "rest 4 hours"' then re install lugs at proper torque.

Answer 5

Brake rotors and/or drums are out of round. You will have to have them turned or replaced.

Good luck.

Pops

Answer 6

My integra was doing the same thing. I replaced the brakes and the rotors, and it stoped doing it

Answer 7

Warped front rotor(s). These cannot be turned in most cases. They are easily replaced if you are mechanically inclined for that sort of thing. Always replace in pairs!

Answer 8

Front rotors are warped

There could also be other things causing this..

Bad front end parts such as,ball joint,tie rod or maybe a strut or shock

Answer 9

Bad brake shoes, calipers need rebuilt or replaced, warped discs or drums.

Answer 10

mate , in my car ( prelude 94 ) , all i done was changin front discs and pads . sweet , and won t cost a lot if u do it urself .