2006-10-21 01:14:17 · 11 answers · asked by enieves252 1 in Home & Garden ➔ Do It Yourself (DIY)
counter clockwise
2006-10-21 01:16:02 · answer #1 · answered by tampico 6 · 0⤊ 0⤋
Counter Clockwise
2006-10-21 04:35:09 · answer #2 · answered by Anonymous · 0⤊ 0⤋
Counter clockwise
2006-10-22 10:29:54 · answer #3 · answered by Sonny Boy 3 · 0⤊ 0⤋
Counter clockwise: Its a normal right hand thread.
2006-10-21 01:24:57 · answer #4 · answered by Anonymous · 0⤊ 0⤋
Make sure you disconnect the sprk plug first.Tap it lightly with a hammer using common sense.Spray with WD40.The treads usually are in the same direction as the blade turns
2006-10-21 05:05:09 · answer #5 · answered by Billy T 6 · 0⤊ 0⤋
Disconnect the spark plug and turn the nut counterclockwise. You may have to put a rust remover on it.
2006-10-21 01:22:16 · answer #6 · answered by fordcoupe96 3 · 0⤊ 0⤋
I got told at school "lefty loosy - righty tighty" It seems to work for everything
2006-10-21 01:30:23 · answer #7 · answered by shirazzza 3 · 0⤊ 0⤋
whichever way the blade turns when on, then you remove by going the opposite way
2016-05-22 07:23:08 · answer #8 · answered by ? 4 · 0⤊ 0⤋
same way as the blade spins
2006-10-21 01:16:39 · answer #9 · answered by OhSimonsBinDrinkin 4 · 0⤊ 0⤋
Lefty loosey , righty tighty ...has always worked for me !
2006-10-21 01:16:00 · answer #10 · answered by ? 6 · 0⤊ 0⤋