English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

i hav 2 pc's and i cant connect to the net when the 1st pc is being used. what should i do after connecting both pc's to the router?
help!

2006-10-19 22:55:46 · 6 answers · asked by karla_duhrla 2 in Computers & Internet Computer Networking

6 answers

You didn't say what brand of router you have.

Hopefully this will help.

Using Linksys WRT54G Wireless-G Router for Secure Setup

Basic Diagram:

+--------+
|High |
|Speed |
|Modem|
+--------+
|
+----------+
|Linksys | +------+
|WRT54G|->|PC-A|
|Router | +------+
+----------+
|
+------+
|PC-B |
+------+

Setup Procedures:

Before you start you will need some important information!!!

If you are already connected, go to the command line

Start-->Run-->cmd

Type ipconfig /all

You should see something like this:

Windows IP Configuration

Host Name . . . . . . . . . . . .... : MyComputerName
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . ..... . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . : No
DNS Suffix Search List. . . . . : MyDomainname.com

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . : MyDomainname.com
Description . . . . . . . . . . ............... : My NIC
Physical Address. . . . . . .......... . . : Unique MAC Address
Dhcp Enabled. . . . . . . . . . ........... : Yes
Autoconfiguration Enabled . . . ..... : Yes
IP Address. . . . . . . . . . .............. . : 192.168.1.42
Subnet Mask . . . . . . . . . . ............ : 255.255.255.0
Default Gateway . . . . . . .......... . . : 192.168.1.1
DHCP Server . . . . . . . ........... . . . : 192.168.1.1
DNS Servers . . . . . . . . ............ . . : Unique IP Address
Primary WINS Server . . . ....... . . . : Unique IP Address

Write these down or save them someplace for future reference.

If you don't see anything like this you will need to get from
your ISP.

After you have all this information and have all your hardware
connected similar to the basic diagram above you will need to
configure your Router.

Open broswer like Internet Explorer, Firefox or some such.

In the Address box type:

http://192.168.1.1

If you get prompted for a Username and Password type these,

ADMIN/ADMIN

We will change these later.

You should be take to the Setup window for the router. Use
all of the recommended settings below. They will help you
configure your router for safe wireless use and wired use in
your home.

Whereever you see something in angle brackets <...> you must
supply. When you create a new password use both upper/lower
case letters and numbers. Write it down, memorize it, eat the
paper you wrote it on and never share with anyone. Just kidding
but you should not take this lightly. Anyone who know this
information could make it so they could hijack your Internet
connection. This could have sever legal consequences or imbaracing
at the least.

Left click the Setup tab

Internet Setup

Internet Connection Type Automatic Configuration - DHCP

Optional Settings Router Name :
Host Name :
Domain Name :
MTU : Auto
Size : 1500

--------------------------------------------------------------------------------

Local IP Address : 192.168.1.1
Subnet Mask : 255.255.255.0

DHCP Server : Enable
Starting IP Address : 192.168.1.42
Maximum Number of
DHCP Users : 2
Client Lease Time : 0 minutes (0 means one day)
Static DNS 1 : From your ISP
Static DNS 2 : From your ISP
Static DNS 3 : 0.0.0.0
WINS :

Time Zone:
(GMT-11:00) Midway Island, Samoa

Check this if it applies

Automatically adjust clock for daylight saving changes

--------------------------------------------------------------------------------
Wireless tab:

Wireless Network Mode : G-Only
Wireless Network Name (SSID):
Wireless Channel : 8 - 2.447GHz
Wireless SSID Broadcast : Enable

--------------------------------------------------------------------------------
Security tab:
Firewall Protection : Enable

--------------------------------------------------------------------------------
Block WAN Requests Block Anonymous Internet Requests
Check it

Filter Internet NAT Redirection
Check it

--------------------------------------------------------------------------------
Administration tab:

Router Password
Local Router Access Router Password :
Re-enter to confirm:

--------------------------------------------------------------------------------

Remote Router Access
Management : Disable

Management Port :
Use https :

UPnP
UPnP : Disable

Left click on the Save Settings button. Close the window. You should be connected to the Internet.

Have fun but be safe!

You can always email if you have questions.

2006-10-19 22:58:55 · answer #1 · answered by Anonymous · 0 0

Connecting b/w both computers, router is not required, Router is using to connect with different networks, First check in your router how many ports are there, U can also connect the computers through router, If so u can use both the computers with different IP address also...

For configuration details u have to mention the router model and manufacture name.

2006-10-20 07:13:36 · answer #2 · answered by Jins 1 · 0 0

Basically router is used to connect different network but to connect two PCs only a crossover cable is required and must of same work group. Try to get a crossover cable. And configure your PCs into same work group.

Good luck.

2006-10-20 06:06:38 · answer #3 · answered by basudev c 2 · 0 0

Dear friend,I found a website that people can earn money online.
Its link is http://www.kazook.net/?r=284
Members earn money via using google,yahoo search in the website.
You can get money by every search.
The more you use the search engine,the more money you will earn.
Some members can earn 3000 dollars per month.
People can really receive money from the website.
Finally hope you good luck!

2006-10-20 06:02:38 · answer #4 · answered by Duncan E 1 · 0 0

Router is use when you have a network computers, if you only have single pc, you don't have to use your router.

2006-10-20 06:01:05 · answer #5 · answered by cristopher d 1 · 0 0

what the first guy said

2006-10-20 06:03:51 · answer #6 · answered by Anonymous · 0 0

fedest.com, questions and answers