Bath with Sand textured walls that needs repainting and i'm not sure how to prep the walls for a smooth finish. Thanks
2006-10-19 14:45:01 · 6 answers · asked by Nerdy 1 in Home & Garden ➔ Other - Home & Garden
You skim coat it. Basically you take a thin layer of joint compound ( for drywall) and smoothly coat the walls, usually you have to do 2 coats. you will have to sand it a little after you are done otherwise you will see lines.
2006-10-19 15:03:52 · answer #1 · answered by Answer Girl 3 · 1⤊ 0⤋
Sand Texture Paint
2016-10-03 11:42:35 · answer #2 · answered by ? 4 · 0⤊ 0⤋
There is a couple of things you can do: You can skim coat the walls with joint compound. Use a wide joint compound knife and apply a very thin coat of mud. Let it dry and sand. If you want a perfect finish and its not to big of an area you can pick up some 3'8 drywall and go right over your existing wall. Also, depending on how hard or secure the sanded paint finish is you can use a sander with a hard grit and try and sand it off. Hope this helps.
2006-10-19 15:36:48 · answer #3 · answered by Anonymous · 0⤊ 1⤋
How To Remove Wall Texture
2016-12-24 14:26:22 · answer #4 · answered by ? 4 · 0⤊ 0⤋
That is a tough one. You either have to get a large bucket of Sheetrock mud and go over all the walls and make them smoother. Replace all the sheetrock? Then you can try to remove it by sanding it with a hand sander in a very inconspicuous place, if it is too hard you may want to rethink it and live with the texture and just paint it a couple of good coats and see if it doesn't look better and you can live with it. good luck.
2006-10-19 15:05:30 · answer #5 · answered by MISS-MARY 6 · 0⤊ 1⤋
you can either sdand it down or you can put a thin coat of plaster of joint compound on it but you better be good with the joint cement.
2006-10-19 14:50:09 · answer #6 · answered by roy40372 6 · 0⤊ 1⤋