2006-10-19 12:37:30 · 3 answers · asked by avennetta@sbcglobal.net 1 in Cars & Transportation ➔ Maintenance & Repairs
you will find the codes in the computor
2006-10-19 12:44:55 · answer #1 · answered by nunofyobiznit 3 · 0⤊ 0⤋
Are you trying to retrieve them, or are you looking for the definitions?
For either/both, go here------->
http://autorepair.about.com/library/ts/obd-i/bl-dtcs-71a.htm
...and scroll down below the definitions for the procedure.
keep in mind, the ECM will only display the codes once per cycle, so you must pay attention here. Don't space off.
If you get distracted, or are not sure of what you saw, turn the key off for > 30 seconds, and start over again.
When you get the "55" code, ALL of the codes have been displayed.
NOTE----->
Keep in mind that each of the codes displayed refer to a fault or failure in a circuit or system monitored by the ECM. they do NOT NECESSARILY refer to a specific component.
Refer to a repair manual for the proper diagnostic and repair procedures for each code.
Good Luck
2006-10-19 23:44:18 · answer #2 · answered by Ironhand 6 · 0⤊ 0⤋
WHAT CODES
2006-10-19 19:41:21 · answer #3 · answered by poppa bear 5 · 0⤊ 0⤋