English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

11 answers

Usually teeth worn on the flywheel ring gear, but could be an incorrect end housing on the starter you purchased.

2006-10-19 14:01:05 · answer #1 · answered by Anonymous · 0 0

Did the same thing to a '70 Monte Carlo. I t was not the starter that was bad. I had teeth missing at the tranny side. That is what caused my starter to go in the first place. You did not mention if you had the problem before. If you had no problem before, then you need to shim the starter so it can get a better grip on the flywheel teeth. Don't use the booger too much until you fix it. It will only make a bad problem worse.

2006-10-19 11:45:33 · answer #2 · answered by rifleman01@verizon.net 4 · 0 0

Like some of them said check the flywheel but if skipping so much it wont start I check the timing if just turning over and over its the timing if its the starter it will be a high pitch whining the starter is not hitting the flywheel

2006-10-19 12:07:50 · answer #3 · answered by Bruce M 1 · 0 0

sound like your fry wheel stripped, you can check by turn a crank shaft couple of turn than try to start again that should crank right up if not you may check you ground to starter or take starter back out take to the shop for testing.

2006-10-19 11:45:30 · answer #4 · answered by pvphelp 2 · 0 0

possible your old srarter motor has torn the ring gear on the flywheel, remore your starter and turn the engine over manually to inspect your ring gear.

2006-10-20 09:01:10 · answer #5 · answered by Scott R 1 · 0 0

i admire myself, for some reason. I replaced my visual charm a jointly as decrease back in the past. I do desire i became a touch taller, in some circumstances. perchance human beings might handle me with a touch extra admire ordinary, i think beautiful. I recommend, that's a touch unrealistic to assert you desire to look like Heidi Klum. which will probable purely ensue to a minimum of one in one million, in the international. i'm able to assert that in the time of the previous, once I had my pimples, that i did no longer get as lots help or interest. yet, in understanding this, i think of my physique of concepts in the direction of human beings has replaced with my visual charm. So socially talking, i do no longer be attentive to if it became my physique of concepts or my replace in seems that made human beings react to me in yet in any different case. probable the two :)

2016-12-16 10:32:48 · answer #6 · answered by Anonymous · 0 0

I'm not real familiar with the blazer.....but you could have teeth missing from your flywheel

2006-10-19 11:37:00 · answer #7 · answered by kaddy1 2 · 0 0

check and see if it had shims in it and make sure they didnt fall out and not put back in or if it didnt have them then go buy some starter shims and try that.

2006-10-19 14:45:46 · answer #8 · answered by rwings8215 5 · 0 0

did you check the teeth on the flywheel? it maybe sh***ged if it's not engauging. is it trying? have you got a feed to the solenoid?

2006-10-19 11:39:34 · answer #9 · answered by MR T 1 · 0 0

flyweel may have teeth missing,or starter throw out not meshing

2006-10-19 11:38:02 · answer #10 · answered by romancer 4 · 0 0

fedest.com, questions and answers