its on the side but not exactly on the corner.....so its at the back of the right side of the car above and further behind da tire...its about a foot tall and 10 inches wide
2006-10-19 09:54:01 · 7 answers · asked by Anonymous in Cars & Transportation ➔ Other - Cars & Transportation
If it is one of those "smooth" kind of dents that just looks like it had been pushed in, you can try pulling it out with a plunger. Just suction the plunger to the dent and pull. I've seen it done, and it looks pretty good. If it is a "crunchy" dent with paint damage and stuff like that, I don't think the plunger trick will work.
2006-10-19 09:57:39 · answer #1 · answered by tsopolly 6 · 0⤊ 0⤋
no tools? try using your noggin... can you get to the back side of the panel in question? if so put a soft rag or large bath towel in the middle of the largest or deepest part of the dent and give it a quick punch inthe direction you want it to go, repeat until you get it all out, watch out for sharp corners/edges and wear protective gloves and long sleeves
2006-10-19 17:03:30 · answer #2 · answered by robert r 6 · 0⤊ 0⤋
No tools? Not possible, especially for the size you're explaining. You're going to need a device to "pop out" the dent. Check www.dentdoctor.com
2006-10-19 16:57:18 · answer #3 · answered by GS79 2 · 0⤊ 0⤋
The power of the mind? Faith healing perhaps? I don't think it's possible. If it's the right kind of dent, you could probably use a plunger to pull it out.
2006-10-19 16:58:35 · answer #4 · answered by sethle99 5 · 0⤊ 0⤋
You need tools unless you can create an incredible amount of suction with your mouth.
2006-10-19 17:02:32 · answer #5 · answered by Pundit Bandit 5 · 0⤊ 0⤋
The answer from tsopolly works because I've done it.
2006-10-19 20:38:52 · answer #6 · answered by bugguy 2 · 0⤊ 0⤋
if you have one you can try a suction cup
smear it with Vaseline and give it a good yank
2006-10-19 17:02:11 · answer #7 · answered by BigBadWolf 6 · 0⤊ 0⤋