Please elaborate if possible.
2006-10-19 03:16:48 · 3 answers · asked by forby_mm 2 in Cars & Transportation ➔ Motorcycles
99% of the time the canister/muffler/silencer is a slip on/bolt on design and you simply remove and replace.
2006-10-19 03:33:30 · answer #1 · answered by Nomad 4 · 1⤊ 0⤋
If preserving the length of the pipe isn't a concern, a cut-off wheel works fast and clean. It's a thick stone disk that fits on the end of a drill. Wear eye protection.
If you need to preserve the length of the pipe or the mounting flange, then I would add heat and see if that helps, but it rarely does. But most of the time, it's easiest to just replace fused pipes and be done with it.
2006-10-19 10:24:17 · answer #2 · answered by Driveshaft 3 · 0⤊ 0⤋
Loosen the clamps, remove the support brackets, pull off old.
To install new, reverse procedure.
If you know someone who has a laser set-up in thier backyard or garage, I would like to meet them.
2006-10-19 22:18:20 · answer #3 · answered by Firecracker . 7 · 0⤊ 0⤋