English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

2006-10-18 07:38:48 · 5 answers · asked by Anonymous in Home & Garden Maintenance & Repairs

Additional detail on this. What are the best chemicals to use for calcium removal?

2006-10-18 07:44:46 · update #1

5 answers

PUT HOT VINEGAR IN THE FOUNTAIN
IT WILL DILUTE IN THE WATER AND THE SUN WILL KILL IT IN A SHORT AMOUNT OF TIME...IT WILL NOT HURT ANY ONE
OR ANY ANIMALS

2006-10-18 07:43:07 · answer #1 · answered by J B W 3 · 0 0

There are two ways, one chemical, the other not.
1/ a 50% cut of muriactic acid and water and then rinsed. If you're not using more than half a gallon, it won't mess up the TA or Ph in a 16 X32.
2/ Head to the local pool shop and buy what's called "Pool Block". That's the name. It's a block of pumice stone that can even be used on tile. Wet the block and the surface you're going at and use some elbow grease.It'll leave a fine grey powdder on the bottom, when you're done, but is easily and safely vac'd up.

2006-10-18 17:09:07 · answer #2 · answered by scubabob 7 · 0 0

If the fountain head can be removed take it off and soak it in CLR that product is made to remove water stains and hard water buildup including calcium deposits

2006-10-18 09:37:19 · answer #3 · answered by Jack C 3 · 0 0

why might every person urinate in a public pool? The restrooms are in basic terms close to. I comprehend the babies yet every person older than 10!?! Urinal problems, I comprehend yet lazy human beings...huh!?!? i do no longer swim with my mouth open and after swimming in a public pool I bathe myself precise so as that I won't odor like urine or chlorine.

2016-12-26 22:34:33 · answer #4 · answered by chatterton 3 · 0 0

probably can't, but if you use a little pool acid, scrub and swab up the drek the contamination will be minimal.

2006-10-18 07:41:40 · answer #5 · answered by Ralph 5 · 0 0

fedest.com, questions and answers