when placing ram into your computer, does placement matter? ie, does the 1gb stick need to be before the small

Question

size stick? my current situation is 2 400mhz 512ram sticks, and Id like to make the jump to 2ghz total.

size stick? my current situation is 2 400mhz 512ram sticks, and Id like to make the jump to 2ghz total. I have 4 slots total, 2 open.

task36, think you misunderstood part of my question. I have 1g now(of 400mhz), and planning on buying a 1g(400mhz). thx for the replies, I will place the largest stick closest to the cpu.

Answer 1

If you have sticks of different sizes, I generally put the largest chip in the lowest slot (usually labeled as DIMM0 for example). However, modern computers usually can take advantage of having the same type, size, and speed of RAM in two slots, this is called dual channel mode, and enhances performance. These slots are usually colered the same (i.e. there will be two blue slots, and two black slots, put the same memory in the same color slots).

Answer 2

You should always put the largest stick of RAM closest to the processor. The MHz is the speed of your RAM so they should all be the same. Having four 400MHz sticks means they will all be 400MHz, not 2GHz.

Answer 3

definite, yet you want to make particular the RAM is like minded. you'll run into issues once you've something like DDR2 memory for a mobo that helps in difficulty-free words DDR, or incorrect sorts, and so on. yet because you purchased the memory, i'm guessing you shown all of this? In such case, definite, in basic terms insert the memory stick. Run a memory attempt to envision for undesirable RAM, and then you're off.

Answer 4

I've been told to put the larger of the two in first I really don't think it matters what does matter is that the two have the same speed and timing. do a memory search for your system or motherboard to be sure on that the timing isn't that critical though but try to keep the same

Answer 5

They're both right. Two diff size sticks WILL work together, just not as well as if the sticks were the same size. and yes, the bigger stick should be closer to the processor.

Answer 6

the small what?

Are you adding additional RAM or replacing old Ram?

So, for example if your installing 1gb to existing RAM then the original RAM must be 1gb as well. Basically if you have 256RAM then you must add another 256 RAM, or if you already have 512 RAM then you must add 512...and so on. If you are using 2 RAM sticks then the values must match each other. I can't really help much without the full question

Answer 7

usually it depends on the motherboard. Most often, it really doesn't matter. The quality and speed of your RAM does though, so watch that.

Answer 8

First check your mother board to see what you can add as not to over load

Answer 9

i dont think wat kim says is right...i use two sticks of different configurations and it works just fine...i got 384 mb of ram jus now!
i dont think it matters as in which slot u put which stick!