I have a new dist.& edelbrock 750 carb. Also what is the best way to adjust this carb.
2006-10-18 04:04:35 · 7 answers · asked by Robbie S 1 in Cars & Transportation ➔ Other - Cars & Transportation
timing, and dont know
2006-10-18 04:06:38 · answer #1 · answered by Anonymous · 1⤊ 0⤋
the timing sounds off but don't forget to run some carb cleaner too. this will help get any gunk out of there that is causing improper opertation. try lucas products... they are very good. doesn't hurt to use the fuel treatment too when you fill up. also.. you may have gotten some bad gas.. that happens sometimes. try running good high test after you make these timeing and cleaning changes.
2006-10-18 11:13:23 · answer #2 · answered by aimlee59 1 · 1⤊ 0⤋
It's either your timing or else you need to jet down your carb, or both. The spitting through the carb thing sounds very much like a timing issue. Peace
2006-10-18 11:07:21 · answer #3 · answered by rasputin 3 · 0⤊ 1⤋
they come adjusted. i think youre missing in a spark plug. pull emm out and check. if not play whith the carb tell it sounds right thats about all you can to besides going to the dealer . i always knew buddys that where pros with carbs
2006-10-18 11:14:30 · answer #4 · answered by james w 3 · 0⤊ 1⤋
timing...yeah def...definitely timing....with a 750 run about 10-12 deg. TDC.
2006-10-18 11:14:25 · answer #5 · answered by Kevin M 3 · 1⤊ 0⤋
Sounds like a jetting problem (low speed jet clogged? wrong size?)
2006-10-18 11:07:29 · answer #6 · answered by JeffyB 7 · 0⤊ 1⤋
IF'N YOU ARE GONNA DO ALOT OF "ROMPING" ON IT YOU COULD BUMB THE TIMING UP A LITTLE AND THAT SHOULD STOP YOUR "HIC-UP" AS FOR YOUR CARB, REFER TO THE MANUFACTURER'S INSTRUCTIONS.
2006-10-18 11:07:42 · answer #7 · answered by Anonymous · 1⤊ 2⤋