is it on mute? That happened to me, and I didn't know where the mute button even was. Than I figured it out.
2006-10-17 10:49:33
·
answer #1
·
answered by Princess Piper 6
·
0⤊
0⤋
right click on "my computer" then "properties" go to "device manager",(might be listed as hardware) open up the one named sound. if there is a problem with your sound card, you will find out in one of those files. right click on one and select properties.it should say if it is working or not. otherwise it tells you other things about. it. hope it helps. also click on the speaker icon in your task bar(by the clock) make sure it's not muted.
2006-10-17 10:48:05
·
answer #2
·
answered by pnybt 4
·
0⤊
0⤋
right click my computer go to properties hardware device manager see if it has a yellow ? if not than maybee click on your audio controller and reinstall the audio driver if that still fails check
start settings control pannel sounds and audio devices check if thats mute if not click audio make sure that looks right, if it does click volume and if than see if anything looks muted there, if you did all that it should in theory work.
2006-10-17 10:50:34
·
answer #3
·
answered by FlyByNight 2
·
0⤊
0⤋
you probable could desire to discover the thank you to attend to all of the wires to your audio gadget. I dunno in case you are able to in simple terms get cord protecting for cutting-edge wires. Tinfoil wrapped around them could help yet could look as though crap. you're able to could desire to attend to the audio gadget themselves in the event that they are much less high priced; maximum respectable audio gadget are already shielded -- however the wires commonly are not, a minimum of not for abode structures. (Kinda amazing pondering this kind of rf interference we've around the abode at the instant.) not sure this could inevitably alleviate the priority yet whilst the audio gadget or wires are finding out on up his sign then protecting them could desire to circumvent rogue alerts from entering into them. The wires or audio gadget are finding out on up his sign at a relentless capability. this could be why you are able to decrease the end result by utilising amplifying the outputs and protecting the audio gadget' quantity administration low -- you're sending the audio gadget a much better sign out of your computing gadget and reducing the speaker amplification to compensate, yet you're soliciting for poorer sound high quality because of the fact the equalizer jacked up too severe will reason clipping. The wires or audio gadget themselves are finding out on up the sign, so as an occasion its not the computing gadget.
2016-11-23 16:28:01
·
answer #4
·
answered by Anonymous
·
0⤊
0⤋
Hit start
hit control panel
hit sounds, speech, & audio
adjust as necessary
2006-10-17 10:49:25
·
answer #5
·
answered by Anonymous
·
0⤊
0⤋
If your computer is not working properly when it is switched on, there is a hardware problem.
Detailed instructions at http://tinyurl.com/yd34oj
2006-10-18 12:08:14
·
answer #6
·
answered by Anonymous
·
0⤊
0⤋