I don't know if you can still buy the stuff, but there was a product called Duraglit, it was a cotton wading material used for polishing metals. It is mildly abrasive, but I know for a fact it polishes plastics a treat.
2006-10-17 06:56:39
·
answer #1
·
answered by Anonymous
·
0⤊
0⤋
Yep. Go ahead with Tcut from any good autofactors or Halfords and Brasso works just as well. I was a bodyshop foreman for many years and these products did the business on all types of car finishes .Just use it sparingly and keep checking for effect.If the scratches are just surface scuffs caused by the builders brick dust then you may notice that the brick dust stains the scuffed area.A light brush with toothpaste might help here before using the Tcut or Brasso .Hope you find this helpful !!
2006-10-17 07:44:21
·
answer #2
·
answered by Ed B 2
·
1⤊
0⤋
Plastic Bath Repair
2016-11-16 09:14:58
·
answer #3
·
answered by cubelo 4
·
0⤊
0⤋
No problem at all: just use some TOOTHPASTE with either a soft toothbrush or a soft cloth. Add a little water and gently rub until the scratch is gone. Works really well on the coloured "scratches" in plastic baths too, for example from plastic bath toys. I promise you the scratches will come out without damaging the bath.....on the contrary, your bath will look like new
2006-10-21 04:15:53
·
answer #4
·
answered by dummy 2
·
0⤊
0⤋
The way to renovate a bath, remove ingrained dirt and body fats, is to use T - Cut (as used in car bodywork renovation - including glass fibre/plastic bodywork). Removing scratches can be tedious work, especially if the scratches are deeper than you imagine. The majority of modern baths are Perspex or similar material and have solid colour within this product. Bluebell/Brasso is also great for cleaning `plastic`baths of general dirt and shines as good as new.
2006-10-17 08:01:52
·
answer #5
·
answered by ED SNOW 6
·
0⤊
0⤋
Brasso works well. It is only mildly abrasive so you have to use a bit of 'elbow grease' Years ago I used it to get white lime stains off a purple plastic bath (yuck), it brought it up a treat. I hasten to add the bath was not mine. My Father in Law was a WW2 pilot and used Brasso to remove the scratches on the Spitfire perspex cockpit windows in the war.
2006-10-18 08:01:51
·
answer #6
·
answered by Anonymous
·
0⤊
0⤋
Sounds stupid but try T-Cut it is what we use to get rid of light surface scratches on cars. Any motor shop like Halfords will sell it or your hubbie may have some in garage.
If the builders have scratched you bath you can claim off them as they will have public liability insurance but wait until they have finished the job.
2006-10-17 07:24:28
·
answer #7
·
answered by momof3 7
·
1⤊
0⤋
I haven't tried this, so it's your call, but you could try using coloured T-Cut, which is a car body product found at Halfords or anywhere selling car accessories. It may take the shine off, but there's probably a product that puts it back afterwards. Ask at Halfords.
2006-10-17 06:52:51
·
answer #8
·
answered by Anonymous
·
0⤊
0⤋
Squeeze toothpast onto a damp cloth & rub in a circular motion gently onto the scratch, then rinse. if it is not too deep, it will disappear. Same can be used for scratches on your car.
2006-10-17 06:58:54
·
answer #9
·
answered by Anonymous
·
0⤊
0⤋
VERY easy with T-CUT or Brasso metal; polish, The airline business uses gallons of brasso to clean windscreens, polish it as if it was metal. THIS WORKS
2006-10-17 06:59:51
·
answer #10
·
answered by xenon 6
·
1⤊
0⤋