I have a paslode impulse framing gun and it is giving me problem's.It fire's ok but the firing pin does not go back .I have to push it back with a screw driver to get it to fire again..I clean the gun regulary and am familiar with it..I just disasembeled the whole thing and cant find out what is wrong. I put it back together and has the same problem. Anyone have this problem? Or can you point me in the right direction?Im in the middle of a job and this blow's
2006-10-16 12:56:24 · 4 answers · asked by tmerring64 2 in Home & Garden ➔ Maintenance & Repairs
Paslode good nailer! I Have the framing and finish nailer. It sounds like to me there is a bend in the pin, or in the frame part where pin slides through. This could have happened when the nails get jammed occasionally. Try to oil this area very good. If this fails take that pin out and replace or try to straighten. I have had to do this to mine. I wish I was there so I could see it! If you dont still have the directions to the parts list I believe you can get them from the Paslode web site.
Good Luck my fellow Pasloder!
2006-10-16 13:19:00 · answer #1 · answered by padidvr2003 2 · 1⤊ 0⤋
Paslode Gun Repair
2017-02-27 08:57:39 · answer #2 · answered by scheidt 4 · 0⤊ 0⤋
Most tool hire shops have a repair service.
2016-05-22 07:35:05 · answer #3 · answered by ? 4 · 0⤊ 0⤋
go out to a subdvision wher they're framing, ask the framer when the nail monkey comes...
buy some nails & he'll rebuild your gun free!
2006-10-16 13:09:57 · answer #4 · answered by Bonno 6 · 1⤊ 0⤋