What do u mean by power play in one day cricket?

Answer 1

A Powerplay is a new rule concerning fielding restrictions in one-day international (ODI) cricket. In the past, there was a 15-over period at the start of an innings when only two fielders were allowed outside the 30-yard circle. This meant that attacking batsman were likely to score runs quickly in the first 15 overs, but would become more watchful at the end of the spell.

In an effort to keep the game more exciting during the middle overs, this rule was amended to apply only to the first 10 overs of every innings, but also in two blocks of five overs, Powerplays, which will be used at the discretion of the fielding captain.

1. The first block of 10 overs in an innings, where the fielding restrictions are exactly the same as per the old ODI rules, is known as Powerplay 1. Two fielders have to be in close catching position.
2. The first block of five overs chosen at the fielding captain's discretion is known as Powerplay 2. The fielding captain has to decide at which point he wishes to implement this rule. He can implement it at any stage in the match, even midway through an over, provided he informs the umpire. Only two fielders are allowed outside the 30-yard circle and the two close catchers are not mandatory in this case.
3. The second block of five overs, identical to Powerplay 2 is known as Powerplay 3.
4. The umpire will signal Powerplay by moving his arm in a circular motion.
5. Should the fielding captain choose not to exercise his discretion, the remaining powerplays will automatically commence at the latest available point in the innings (i.e. at the start of the 41st and the 46th overs in an uninterrupted innings).

The Powerplay was intended to add to the excitement in ODI cricket. If the batting team has got off to a very quick start, the fielding captain choose to delay Powerplay 2 and 3, and instead spread out the field to stem the flow of runs. Powerplays may then be taken when an attacking batsman is out, or when the run rate has been reduced. Otherwise, all 20 Powerplay overs are likely to be taken at the start of the batting team's innings.

The rule was first encountered in the One-day International between England and Australia on 7 July 2005. It is possible that the innovation will be a part of the playing conditions for the 2007 Cricket World Cup.

Answer 2

here is the answer-

A Powerplay is a new rule concerning fielding restrictions in one-day international (ODI) cricket. In the past, there was a 15-over period at the start of an innings when only two fielders were allowed outside the 30-yard circle. This meant that attacking batsman were likely to score runs quickly in the first 15 overs, but would become more watchful at the end of the spell.

In an effort to keep the game more exciting during the middle overs, this rule was amended to apply only to the first 10 overs of every innings, but also in two blocks of five overs, Powerplays, which will be used at the discretion of the fielding captain.

The first block of 10 overs in an innings, where the fielding restrictions are exactly the same as per the old ODI rules, is known as Powerplay 1. Two fielders have to be in close catching position.
The first block of five overs chosen at the fielding captain's discretion is known as Powerplay 2. The fielding captain has to decide at which point he wishes to implement this rule. He can implement it at any stage in the match, even midway through an over, provided he informs the umpire. Only two fielders are allowed outside the 30-yard circle and the two close catchers are not mandatory in this case.
The second block of five overs, identical to Powerplay 2 is known as Powerplay 3.
The umpire will signal Powerplay by moving his arm in a circular motion.
Should the fielding captain choose not to exercise his discretion, the remaining powerplays will automatically commence at the latest available point in the innings (i.e. at the start of the 41st and the 46th overs in an uninterrupted innings).
The Powerplay was intended to add to the excitement in ODI cricket. If the batting team has got off to a very quick start, the fielding captain choose to delay Powerplay 2 and 3, and instead spread out the field to stem the flow of runs. Powerplays may then be taken when an attacking batsman is out, or when the run rate has been reduced. Otherwise, all 20 Powerplay overs are likely to be taken at the start of the batting team's innings.

The rule was first encountered in the One-day International between England and Australia on 7 July 2005. It is possible that the innovation will be a part of the playing conditions for the 2007 Cricket World Cup.

The supersub rule, introduced contemporaneously on a trial basis as the Powerplay rule, however, has not been without controversy. Respected BBC cricket scorer and statistician Bill Frindall has dismissed both the inventions as a desperate attempt to jazz up one day cricket in the face of competition from the new Twenty20 format [1]. Wisden Cricketer's Almanack similarly dismissed the idea, suggesting instead that the way to increase interest in One Day Cricket might be to play fewer matches

Answer 3

Power Play is related to field restrictions in the Cricket Match.

More details about Power Play are given below:

Previously, in ODI's, there were no fielding restrictions. The fielding captain could keep his players anywhere he wanted. Then, around the World Cup in 1996, ICC introduced the 15 over field restriction rule. Only 2 fielders were allowed outside the 30 yard circle from the batsmen for the first 15 overs on an innings. And from the 16th over, 5 fielders were allowed to move out. One more important aspect of that rule was that two fielders had to be in catching positions - 15 yards from the batsmen, till the field restrictions applied.

Now, in mid 2005, ICC - headed by one of the slowest batsman - Sunil Gawaskar came up with some changes in the restriction rule. The previous 15 overs of Field restriction is increased to 20 over - in three blocks, called Power Play.

Power Play 1 - Its mandatory for the first 10 overs of an innings in a one day cricket match. Only two fielders outside 30 yards from the batsmen. And two fielders have to be at catching positions..

Power Play 2 and 3 - These are two blocks of 5 overs each. The fielding captain decides when he wants to employ these two block. The moment he calls for the second power play and the third power play, 5 overs from that particular over will have only two fielders outside the 30 yards circle. A captain can't chose for a power play in the middle on an over. He has to tell the umpire in the starting of an over. For example, if the batting team is scoring freely, he can chose not to take power play after the first 10 overs and set fielders at the boundary. And when he sees that run rate in back in control, he can take power play from that over. It can be from 11th over or 21st over. But he has to take these two blocks within those 40 overs. Otherwise, the last 10 overs will automatically be Power Plays.

Note - No catching fielders required during the Power plays. Only for the first 10 overs of the match.

Answer 4

The power play in One day cricket means that there 20 over field restriction instead of 15over which was been in place.In that 20 overs(previously 15 overs) 9 fielders including bowler and wicket keeper should be inside the circle.In that 20 overs first 10 overs field restriction is must and another thing that is to be added is two fielders must be in catching position.Previously it was fifteen overs.The next ten overs can be chosen by the captain but it should be in block of 5 overs each and it is not mandatory to have two fielder in catching position but 9 players should be in the circle

Answer 5

Power play means the duration when the field restrictions are on. This includes the first 10 overs. After that on the discretion of the captain the next two power plays can be taken.Each power play is of five over duration. A total of 20 overs are played in power play restriction in a total of 50 overs.

Answer 6

powerplay is the period when the fielding team is allowed to keep only 2 fielders outside the 30 yards circle.There are 3 such powerplays, one of 10 overs and the other two of five overs each. The 10 over powerplay is compulsory and has to be taken in the first 10 overs of the innings. The other two powerplays can be called upon at the discretion of the fielding captain.

Answer 7

Under the new ODI regulations, instead of having the fielding restrictions in place for the first 15 overs there are restrictions in place for the first 10 overs and then two blocks of five further overs – the power plays – to be implemented at the discretion of the fielding captain at any time later in the innings.

Answer 8

powerplay is the period when the fielding team is allowed to keep only 2 fielders outside the 30 yards circle.There are 3 such powerplays, one of 10 overs and the other two of five overs each. The 10 over powerplay is compulsory and has to be taken in the first 10 overs of the innings. The other two powerplays can be called upon at the discretion of the fielding captain.

Answer 9

Its a new rule introduced by the ICC to Spice up the game..after first 10 overs of restrictions,,,,,, the next 10 overs can be divided over agroup of (two 5 over) power plays which are shown by the Umpire on the captains consent.anytime during the full quota of 50 overs .................

Answer 10

Power play means that all the fielders except two should be within the circle.