The heat in my taurus Will not turn on but If I pop the hood and then drop it back down it turns on seconds later it doesnt even have to be slammed im assuming something is loose in it but I dont even know what I would look at to check for a loose connection...any ideas?
2006-10-15 10:46:02 · 4 answers · asked by alestixmt 2 in Cars & Transportation ➔ Maintenance & Repairs
The AC also doesnt work.
2006-10-15 10:51:27 · update #1
I take it the fan is not working when you say heat doesn't work ?
If the fan doesn't run it locks out the a/c.This is because without air across the evaporator, whih is part of the heater, it will freeze and damage the system.
Find the wires to your heater motor, should be on pass. side near fire wall, and look for loose connection.
2006-10-15 11:29:21 · answer #1 · answered by tronary 7 · 0⤊ 0⤋
regrettably all 3 are confident opportunities. without some worry taking photographs artwork it quite is impossible to pinpoint. eliminating one end of the heater hoses and checking for flow can be certain if it quite is the heater center or not. till the priority is remoted a fee to repair is in basic terms a gamble.
2016-11-23 13:23:44 · answer #2 · answered by ? 4 · 0⤊ 0⤋
Sounds like the blender door is hanging up,could be foreign debris in airbox.
2006-10-15 10:49:15 · answer #3 · answered by gdwrnch40 6 · 0⤊ 0⤋
vacumm lines...
2006-10-15 10:54:34 · answer #4 · answered by mommy2savannah51405 6 · 0⤊ 0⤋