Greetings,
I go to start and then RUN and type in ipconfig; for I need to know what my IP address, Subnet Mask, Gateway, DNS 1 and DNS 2 are so that I can get our new Wireless Broadband Router set-up.
Any possible suggestions or directions?
Sincerely,
Brady
2006-10-15 10:45:49 · 6 answers · asked by countrycove 1 in Computers & Internet ➔ Computer Networking
Ok, I did just that and all that I get is a black box which does something like this:
C;//documents and settings/Brady/>-
that little bar at the end is flashing.
Now what, we sure appreciate you good folks.
2006-10-15 10:58:49 · update #1
You are almost right on this one. You are forgetting just one little step, when you click on start/run you need to type in "cmd" then you will get to a command window once you get to this command window you will be able to type in "ipconfig" and get what you need to see.
2006-10-15 10:52:59 · answer #1 · answered by Dani D 2 · 1⤊ 0⤋
Instead of running 'ipconfig' at the 'Start - Run' command, type 'cmd' at the Start - run command.
A black window will open.
Type ipconfig in there and you will get what you were looking for.
2006-10-15 11:04:35 · answer #2 · answered by rir318 2 · 1⤊ 0⤋
go to run and type cmd this will open a command window then type ipconfig.
2006-10-15 10:49:36 · answer #3 · answered by Bob 2 · 2⤊ 0⤋
where the little flashing bar is type ipconfig and press return
2006-10-15 11:43:11 · answer #4 · answered by sjj571 4 · 0⤊ 0⤋
If you can't get that far, then you really don't have any business in the DOS prompt.
Google network programs, or go to download.com and search for free network programs to help you monitor your network with a nice easy to use graphic interface.
2006-10-15 11:47:33 · answer #5 · answered by ? 2 · 0⤊ 0⤋
Sounds as in the adventure that your battery is low on fee. might desire to easily might desire to be charged or there could be another themes. you are able to desire to constantly attempt to bump initiate it, that little 650 could be exceptionally consumer-friendly to bump initiate. purely get on the bike and positioned your bike in 2d kit. Push the bike as rapidly as you are able to, do no longer hassle if that's no longer that quickly it does not might desire to be. as quickly as your going as quickly as you think of you are able to pass drop the grab and initiate the bike. you are able to the two experience away to rapidly grab the grab whilst the engine starts. optimistically there is not any longer something incorrect along with your bike's charging device and no further strikes would be mandatory. If it does not initiate back after driving it for somewhat you are able to desire to desire to do away with the battery and take it to an motor vehicle areas keep close to you plenty will attempt your battery for unfastened, an consumer-friendly thank you to verify if it would desire to get replaced.
2016-10-02 08:07:15 · answer #6 · answered by ? 4 · 0⤊ 0⤋