When putting plastic over windows during winter..is it better to put them inside or out?

Question

I have seen it done both ways.

Answer 1

It would depend on which way is easier to access and which will give you a better seal. one benefit to outside is that you can often extend the plastic on past the window panes easier to be sure you seal air not only from the glass but also from any gaps in woodwork. Either way will be beneficial. I would look at where you will get the best seal and where you will do the least damage to trim etc when you staple it, tape it, or however you choose to adhere it

Answer 2

put it on the inside. It is easier and less noticeable from the outside. Plus the air between the window and the inside plastic is more and provides for a better barrier from the cold.

Answer 3

depends on your region because you do not want moisture build up in your house but the outside of the window would keep the wind from hitting the window somewhat and does not conduct temperatures like single pane glass. but it probably would not look are last as long on the outside

Answer 4

Inside. Try reading the instructions

Answer 5

Inside. You don't want moisture to get in as well as the cold. Make sure their is no gaps. Best to do it on a windy day so you can feel for drafts easier.

Answer 6

looks better on the inside but works better on the outside.

Answer 7

Not sure that it matters but it looks better to put it on the inside so that all your neighbors dont have to see it.

Answer 8

Is this a porch?
Then use it outside. Make sure it is very tight and nail or tack it down with finishing strips. If it's loose, it will probably rip on you.

Answer 9

Outside. Try using weather stripping as well.

Answer 10

Outside would be best. Then it's protected from wind and snow and ice.