English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

i bought a network card as my motherboard is quite old so it did not have the network interface. I have connected my wirelss router to it and installed the drivers for the Network Adapter Card. When i try to install my wireless modem from the AOL support CD...it says something like "error...cannot contact router"....connections are perfectly fine.

I dont know if this helps but my network card is Netgear and 32-bit....please help

2006-10-13 12:41:44 · 3 answers · asked by mackavelli786 1 in Computers & Internet Computer Networking

3 answers

that is because AOL sucks. Really I had it like 14 years ago and RAN!!!! First of all it treats people like you have the IQ if a Jar of Mayo, then it puts so much damnn ad ware in that it just chokes your pc also.

2006-10-13 12:56:43 · answer #1 · answered by Anonymous · 0 0

what isn't nicely suited with the sixty 4 bit OS is the wizard on the CD The router itself would not care what OS you run. it quite is going to artwork with abode windows, MAC or Linux that's what you do grab the instruction manual connect your computing gadget to the router and modem as shown interior the instruction manual Ditch the CD - you do not choose it Open your browser From the instruction manual enter the default handle for the router enter the consumer call and password you presently are interior the setup pages for the router The instructions interior the instruction manual will walk you interior the direction of the setup commonly all you're able to desire to do is clone the MAC identity and settle for something of the default settings Then set up your instant risk-free practices Come on lower back in case you get caught have exciting

2016-11-28 04:17:23 · answer #2 · answered by Anonymous · 0 0

Are you connecting your computer wireless or wired?

-I am thinking wireless. Here are a couple of things I check when I am troubleshooting my wireless connection.

1.) On my PC I check to see if I am running DHCP or if I am using a static IP. If I am running DHCP then I make sure my routers DHCP server function is enabled. If it is I make sure my NIC is DHCP enabled. If I am going to use a static IP then I make sure I fill in the IP, Subnet Mask, Gateway, and the DNS IP's.
2.) Check the SSID.
3.) Check my wireless security settings. (WEP, WPA-PSK, etc.)
4.) Disable/Enable my devices, try the 'Repair' option in XP

-If it is wired then I would still check the DHCP settings and then try a different cable (layer 1 is a big culpret in network problems)

2006-10-13 17:32:29 · answer #3 · answered by egoo76 2 · 0 0

fedest.com, questions and answers