Dropped the shower head and it has taken a piece of the enamel off leaving a black indentation.
2006-10-13 08:42:36 · 7 answers · asked by Anonymous in Home & Garden ➔ Maintenance & Repairs
i have done it many times my self. i take it you have a enammelled steel bath yes ? offcourse all you need to do is dry the area thoroughly then from a hardware store you need to buy a can of white gloss enamel spray. before you use it give it a good shake and spray a little on a scrap sheet first to clear any debris in the nozzle then just apply the spray to the damaged area !!!!!!!!! there you go as easy as that.
2006-10-14 01:15:48 · answer #1 · answered by deep 1 · 0⤊ 0⤋
yes. you will need to get enamel paint from a diy store and follow instructions. I did this a few months ago but its ok now and looks good as new hope this helps.
2006-10-13 15:48:30 · answer #2 · answered by party babe 1 · 0⤊ 0⤋
Yes it's possible, however I cannot say how good it would be. Take a look at the following website
2006-10-13 15:47:40 · answer #3 · answered by Anonymous · 0⤊ 0⤋
use klenks enamel repair which you can find at most home improvement centers like home depot.
2006-10-13 15:47:24 · answer #4 · answered by Anonymous · 0⤊ 0⤋
yes ivehad it done by a bath restorer cost £25 came up a treat!
2006-10-13 15:51:25 · answer #5 · answered by graham s 1 · 0⤊ 0⤋
Far better to peel another potato, chip it and add it to the oil!
2006-10-13 15:52:03 · answer #6 · answered by ? 6 · 0⤊ 1⤋
YES STEEL TUB - CALL PORCELIAN REPAIR CO., OR SAND & PAINT W/ EPOXY
CAST IRON IS MUCH MORE DURABLE.
2006-10-13 15:47:35 · answer #7 · answered by Bonno 6 · 0⤊ 0⤋