have got code but do not know how to programme in
2006-10-13 01:32:58 · 18 answers · asked by NIGEL P 1 in Cars & Transportation ➔ Car Makes ➔ Audi
When all else fails, read the manual. If you have no manual, email me the model and I will look it up this weekend for you.
2006-10-13 01:34:47 · answer #1 · answered by Lick_My_Toad 5 · 0⤊ 0⤋
Magikmann answer is correct, but sort the battery issue 1st, if the battery is not in good condition or 100% charged you will be looking for a jump start and putting code in again, just driving around wont charge the battery fully and for every degree the temperature drops so does your batteries efficiency, winters on it's way.
2006-10-14 05:03:36 · answer #2 · answered by bmwdave 1 · 0⤊ 0⤋
most reputable garages can do this for you for a nominal fee of about £25. If you dont want to pay this then you can phone the maufacturer of the car (if its original stereo) or manufacturer of stereo and they will give it to you, although some need reprogramming again. Sometimes theres a code printed on the casing of the unit itself. You used to be able to put it in the freezer for a while to descramble it, but i believe this doesnt work any more esp. on newer steros.
Sorry i misread the question, i thought you had no code. Use the channel selector buttons to put the code in when asked....usually works.
2006-10-13 01:41:01 · answer #3 · answered by heleneaustin 4 · 0⤊ 0⤋
My Punto just asked for the code as soon as I turned the radio on again and I punched in the numbers using the station selector buttons.
2006-10-13 01:36:22 · answer #4 · answered by Anonymous · 0⤊ 0⤋
There should be a code in the owner's manual otherwise u have to take it either to the delaership or to a proffessional to unlock it for u
2006-10-14 01:25:50 · answer #5 · answered by Prman 2 · 0⤊ 0⤋
Push power and hold. It will ask you to put in the code. If it does not take it then it has to be cleared at the dealer. We had same problem when they replaced the battery in our Alero.
2006-10-13 01:35:45 · answer #6 · answered by bildymooner 6 · 0⤊ 0⤋
Yeah the key should work, but that's Holden quality for you. Give the NRMA a call or RACV or whoever applies in your state. Or you could ring your local Holden service department to see if they have any ideas.
2016-05-21 22:36:52 · answer #7 · answered by ? 4 · 0⤊ 0⤋
you should havehad a code when you bought the car or radio, if not take the car to a audi dealer and they should be able to unlock it for you.
2006-10-13 01:37:21 · answer #8 · answered by henry_marlow1956 1 · 0⤊ 0⤋
Need to know make of car for starters,as they have different ways to enter code.
2006-10-13 01:42:20 · answer #9 · answered by Anonymous · 0⤊ 0⤋
most of the time you can just program it by pressing the numbers of the radio thats what i did to my civic if not check the car manual
2006-10-16 09:12:09 · answer #10 · answered by yeilyj 2 · 0⤊ 0⤋