How can I setup a network using 2 or more PC's in Win XP?

Question

I'M USING WIN XP, BUT CAN SOMEBODY JUST TELL ME HOW TO SETUP A NETWORK. IVE GOT A HUB AND REST OF THE HARDWARE. I JUST WANT TO PLAY GAMES OVER A NETWORK BY USING A HUB AND CONNECTING TO MY FRIENDS PC'S. ANY ADVICE?

Answer 1

goto start > accesories > communications > network setup wizard and follow the prompts. Make sure your computer is connected to the hub.

Also, depending on the game, you may need to open specific ports in the hub to allow communications. See your hub's documentation on how to do that.

Answer 2

There are few different ways you can do this.
One of the PC's should be connected to the internet dialup, DSL, Cable.. whatever

That PC should also have a network card in it.(additional one if ur using cable internet)
connect it to the hub.. connect all other computers to the hub.

Either setup DHCP on the host computer to give out IP address or, set IP address on each PC. 192.168.0.whatever

Answer 3

if you mean, setup a network for the purpose of lan play or simply share your internet connection between the two computers, then you simply need a router.

A router that is plugged into your modem, and then two cables comming out of the router going into each of your computers. (this is if you have a wired router) for wireless its teh same procedure but you would need a wireless network card on both computers to receive the wireless signal.

It would help me answer your question a little bit more specifically if you gave me what router you had, then i couldve given you a link giving instructions for that router.

Good Luck

Answer 4

No, i do no longer use social networking. i'm no longer a social guy or woman by nature, yet i do no longer think of of i'd desire to as properly... i attempt to no longer spend a great form of time in front of a prepare demonstrate. I learn my digital mail regularily, I in many cases bypass on Youtube (somewhat usually for song - i'm a guitarist) and occassionally I bypass to Yahoo strategies... I do little learn online and that i below no situations use MSN messager like a great form of of my acquaintances. a great form of the persons i understand who're around my age (15-sixteen) spend approximately 4-6 hours each night on facebook or msn. it rather is amazingly usually pointless chatter that couls in basic terms as properly be finished in college the following day, no longer to point over the telephone or honestly face-to-face with the guy outdoors of school. there is one in each of those factor as being too linked socially. i do no longer see why somebody needs to be wearing on a communique with their acquaintances all day. To me it form of feels like an invasion of privateness and a great waste of time. Having a social life is somewhat a stable factor - even besides the undeniable fact that it is going to probable no longer substitute into your in basic terms life.

Answer 5

network

you conncet the ethernet cable to the back of the router on the port that is marked ethernet then you take the other end of the cable to the ethernet card on on the back of your pc you conncet it to the port marked ethernet

then you conncet the other cable to the back of the ruter port that is marked DSL then you take that cable to the modem box conncet it to the port marked on the modem marked DSL
then you conncet the modem cable box to your phoneline box
conncet the power cable to the router and put the power on
now you put in the cd driver that came with your router
and you install the network drivers
now you need to set up a network id & password on the router
you will be told how to do all that when you install the drivers & software for the router
when you have install the drivers and software fo r the router
your need to restart the pc
when your back at the desktop
you will see a network icon in the taksbar by the pc time
if it has a red X on it right click it and click on enable
if you dont see a network icon in the taskbar
click on start/control panel
click on
network and internet connections
icon
then click on network connections icon
now right click the
local Area connection
icon and click on properties
tick the box
show icon in notification ares when connected
tick the box
notify me when this connection has limited or no connectivity

now click on
then authentication tab at the top

tick the box
enable IEEE 802.1x authentication for network
tick the box
authenticate as computer when infomatiion is available
then right click
local Area connection
and click on enable
now your router internet will log online with in 45 seconds
when your router is online you conncet your phoncable to the modem marked
phone

now when your router is online

then you need to get in the router home page and click on the wireles lan icon & click on configure

and you set up a network id for the laptop you call call your network id anything ,a name with numbers or letters with number
and a security wpa key not a wep key dont use that one use wpa key then click apply at the bottom when you have set up your network id and security wpa key

then you put a wireless usb adapter on the laptop you install the network drivers on the laptop for the wireless usb
then you click on the network icon in the taskbar by the time on the laptop right click on it go to properties then you click on view wireless networks then you click on advanced tab you put in the network id and security key that u set up on the router home back then you click apply & ok then you click on view wireless network's your see your network id click on that then click on conncet


if you have a wireless card in the laptop just

click on the network icon in the taskbar by the time on the laptop right click on it go to properties then you click on view wireless networks then you click on advanced tab you put in the network id and security key that u set up on the router home back then you click apply & ok then you click on view wireless network's your see your network id click on that then click on conncet

if your network cuts out at any time just right click the network icon by the pc time
and click on repair that is on the 2 computers you can do this then windows xp will repair the
network for you and it dont take long at all
if you cant set that up
your be better off if you get you (isp)server to help you set all that up



transfer files from pc2pc

have the 2 copmuters on the wirless network then
Dual login yahoo messenger files trasfer from pc 1 to pc 2

on pc 1 you login a yahoo id then on pc 2 you login another id
then you add to friends list then you get yahoo id 1 to pm yahoo id 2 then yahoo id pm back yahoo id 1 then you click on the send file icon then you send files from pc1 to pc 2
your send files over from pc 1 to pc 2 verry fast ,dont go in a chat room while your doing the file trasfer coz this will only slow down the trasfer


The easy way: Over the network
The simplest way to connect between laptop and desktop is to place them both on the same network. Configured and connected properly, you can share and access both the desktop and laptop's hard drive to easily exchange files and whatnot.You should use this approach to connect two systems together if you can. Even if you have only a desktop and a laptop, you may still want to get networking hardware to make connecting the two a snap.That ugly wire thing
Before a networking standard appeared, computer users would connect their desktop and laptop computers by using both systems' serial or parallel ports. To accomplish this, you had to use an ugly wire cable.

You can still connect computers this way, if you must. Merely connecting the two computers isn't enough, however; you also need software to help make the connection happen. The software comes in two parts, one for the laptop and another for the desktop. You have to have both parts running simultaneously for the dang thing to work.

Not any old cable works for a direct connection. You may want to buy a cable setup designed specifically for connecting two computers. A standard printer or serial cable just doesn't work.

Using the infrared port
If both desktop and laptop have an infrared (IR) port, you can use that port to beam information between the two systems.

The best way to connect your computers by using the IR port is to orient the laptop and desktop so that the IR ports do a Mexican Stand off with each other, eye to eye (or port to port). With this setup, nothing comes between the ports to break the connection.Make sure that you have the IR port enabled before you proceed