They're a cylindrical part that screws into a fuel tank.
2006-10-12 12:38:01 · 3 answers · asked by erik j 1 in Cars & Transportation ➔ Motorcycles
Could be a capacitive proximity sensor.
2006-10-12 12:42:56 · answer #1 · answered by gdwrnch40 6 · 0⤊ 0⤋
-They don't have a float attached to them, because the float is inside the cylindrical assembly.
-There's a strip of metal (about 10mm wide & 1mm thick) running down the center of the tube.
-This is what the strip of metal looks like - It's the length of the cylinder. It's twisted 360 degrees. A long spiral strip of metal.
-The float can only move up & down. It can't spin around. It has a slot in the center and the strip of metal fits through it.
-When the float moves up or down, it turns the strip of metal clockwise or counterclockwise.
-The sensor reads what position the strip of metal is pointing to and sends a signal to the fuel level gauge.
2006-10-12 13:25:05 · answer #2 · answered by guardrailjim 7 · 0⤊ 0⤋
-they do now not have a drift linked to them, because of the fact the drift is contained interior the cylindrical assembly. -there's a strip of steel (approximately 10mm extensive & 1mm thick) working down the middle of the tube. -that's what the strip of steel feels like - that's the dimensions of the cylinder. that's twisted 360 stages. an prolonged spiral strip of steel. -The drift can in basic terms flow up & down. it ought to't spin around. It has a slot indoors the middle and the strip of steel fits by using it. -even because of the fact the drift strikes up or down, it turns the strip of steel clockwise or counterclockwise. -The sensor reads what place the strip of steel is pointing to and sends an illustration to the gas ingredient gauge.
2016-11-28 02:32:36 · answer #3 · answered by roever 3 · 0⤊ 0⤋