208-230V 50/60Hz That's all I know about these magnets.
2006-10-12 11:10:39 · 2 answers · asked by burnholywater 2 in Science & Mathematics ➔ Physics
If you don't know the current draw, don't mess with it.
At least, use a 1/2 amp fuse in each wire and hide behind something when you power it up in case it explodes. Also make sure someone can cut the power real fast, and make out a will.
There's a good chance you'll die if you touch it when it's active.
2006-10-13 11:15:19 · answer #1 · answered by Nomadd 7 · 0⤊ 0⤋
First, the charger places out approximately 14V DC. Your magnets are rated for 208-230V AC. you're able to opt for an inverter to transform the DC cutting-edge to AC. At 10 amps the charger components a hundred and forty watts. that's approximately 0.6 amps at 220V. Connecting 5 magnets in series will decrease the present flow by utilising a ingredient of 5. At 0.a million amps, I doubt the magnets could %. up plenty. you would be greater effectual of procuring for a appropriate capability grant.
2016-11-28 02:24:48 · answer #2 · answered by Anonymous · 0⤊ 0⤋