require jumper settings for quantum fireballp as20.5?

Question

I'm upgrading my drive and need to set the old drive to slave

Answer 1

Look at the drive from the back, with the power socket on the right hand side. To the left of the power socket there are a set of pins - 5 along the top, 4 along the bottom. The leftmost of the 5 along the top has no "pair" on the bottom row.

Put the jumper across second pair in from the right so that the jumper is going verticaly - ie covers one pin on the top row, one on the bottom.

(I think the drive will also act as a slave simply by removing the jumper completely).

Answer 2

The diagram of the pin settings should be printed on the drive itself.