Like some kind of command line interface or the like!
2006-10-12 08:54:18 · 4 answers · asked by NEIL R 1 in Computers & Internet ➔ Security
Like some kind of command line interface or the like,as I use LAN 2 connect.
2006-10-12 09:01:42 · update #1
Pull the plug out?
2006-10-12 08:59:26 · answer #1 · answered by Mike10613 6 · 0⤊ 1⤋
Yes there is!
Assuming you are connected to the hub by a wire, go to Start, select Run, type "cmd" (without quotes) and hit enter.
Then type "ipconfig" (also without quotes) and note the numbers next to Default Gateway - it'll be something like 192.168.1.10.
Go back to Internet Explorer and type these number in the address bar. You'l get prompted for a username and password. Unless you've changed them from the default they'll both be "admin".
Now you'll get access to the hub manager functions. Unfortunately I can't tell you exactly where to go here, so use common sense to find the right place in the configuration. I know its there, because I've done it - but dont have access now to be able to give you detailed steps where to find the function to switch off the wireless.
BTW - its a very sensible move to switch off the wireless if you are not going to use it.
2006-10-12 17:47:41 · answer #2 · answered by Anonymous · 0⤊ 0⤋
you can turn it off
open 192.168.1.254 in the browser
click on advanced on the left bottom
then advanced again in the middle
click on switch to another user;
then type in the username and psswd as admin
then click on home network-->interfaces
then on configure on the top right
u have an option to turn it off;
2006-10-16 07:20:23 · answer #3 · answered by diwawaits 2 · 0⤊ 0⤋
Disable your wireless adapter on computer and connect with USB or ethernet cable
2006-10-12 16:15:07 · answer #4 · answered by Anonymous · 0⤊ 0⤋