How would resize a quilt pattern for twin size to queen size?

Question

I currently have a pattern that is designed for a twin size bed. I want to make a quilt for a queen size. Is there any site that would show how to do this?

Answer 1

If it is a quilt that is made up of the same block over and over, you need to determine how big your quilt will be, and divide by the block size to find the length and width. If you have borders, subtract that measurement from each side. There's a link below that does all of the calculating for you. If the blocks are turned to form a pattern (like log cabin blocks in a barn raising setting), you'll need to add an even number of blocks to keep everything centered.

If your quilt is made up of two or more different blocks, you usually need to add an even number of rows to keep it looking balanced. So you might end up making your quilt slightly bigger or slightly smaller than a standard queen.

If your quilt is a single pattern, like one big block, you can try figuring out how much bigger than the current dimensions you want it, both width and length. This is WAY more complicated than you probably want, and if that's the case, just try adding a combination of pieced and plain borders to expand the quilt.

Answer 2

Without seeing the pattern it's difficult to say, but if it's a patchwork pattern in a standard size (6 inch block, 8 inch block, 12 inch block), you only need a calculator and a measuring tape.

First, determine the dimensions of the queen sized quilt by taking the mattress size and adding what is needed for the quilt to drape over the sides, the foot, and any extra you want at the top. 88" by 108" is a common queen size but you can measure a store-bought coverlet that is the right size as well.

Then, do the math to increase the number of blocks from twin to queen sized.

Let's say your pattern has 12 inch blocks and a four inch border all around. Subtract 8 from 88, divide by 12, and round down. You will need six blocks across.

Subtract 8 from 108, divide by 12, and round down again. You will need eight blocks across. 6x8=48 blocks to make the queensized quilt. You can increase or decrease the border size to make up any small difference in size.

Check out your local library; any standard how-to book on quiltmaking will have more thorough instructions.

Answer 3

Size Of Queen Size Quilt

Answer 4

I don't know of any sites, but queen size beds have a 60"x80" surface and then there are the sides, you can make them any length and width, just as long as you have everything for your quilt measured to fit a queen size. 2 feet hanging over the sides and foot is the best, in my opinion.

Answer 5

Find a friend who has electric quilt or some other quilting software program..........it can figure it for you. I stink at math, and calculating, so that's what I would do :)

Answer 6

I wish my mom was here to ask that one! You might find someone that knows over here:

http://www.myquiltingblog.com